ISO/TS 16949 
Building Quality Products & Solutions Since 1957Heat Shrink
These products provide insulation, strain relief, and protection for a wide range of electrical wire or cables. Our heat shrink products are patented heat-shrinkable, wraparound solutions for on-site installation and repairs. You have the opportunity to add a wide variety of additional characteristics to a wire bundle, including water blocking, strain relief, EMI/RFI shielding, and chemical and thermal protection.
Heat Shrink Wraps
Side-Entry Heat Shrinkable Repair Wraps
PRT® Wraps are a unique solution to a common problem in the wire and cable interconnect industry. Our products ability to wrap, and then shrink when heated, provides an excellent means for creating a professional looking repair or secondary jacket to in service assemblies. By taking advantage of PRT's wrap around with side entry installation, we eliminate the need of time consuming disassembly and pull-thru installations while adding the option for break-outs where needed.
$331.14
PRT® (ES-100)
Part No. ZT11-04-005-01-X600.0
Drawing No. ZT11-04-005
4 available combinations
Environmentally Sealed PRT® Heat Shrink Wrap
Shrink-N-Repair® (Thin)
Part No. ZT16-04-016-X12.0-1U
Drawing No. ZT16-04-016
4 available combinations
Repair wires or cables with a diameter of 0.05" to 0.25"
PRT® (Transition)
Part No. ZT05-04-003-01-B-X6.0
Drawing No. ZT05-04-003
8 available combinations
PRT® Transition Boot Heat Shrink Wrap
Shrink-N-Repair®
Part No. CSMR-ZT16-04-012-B-X12.0
Drawing No. ZT16-04-012
5 available combinations
Repair wires or cables with a diameter up to 1/2"
PRT® (ES-135)
Part No. ZT03-04-010-01-X600.0
Drawing No. ZT03-04-010
17 available combinations
Environmentally Sealed High Temp PRT® Heat Shrink Wrap
Z-Block® (135)
Part No. ZT11-03-001-2.0-X300.0-2U
Drawing No. ZT11-03-001
1 available combinations
High Temperature Thermoplastic Hot-Melt Water-Blocking Adhesive (Up to 275°F)
PRT® (Clear)
Part No. ZT05-04-004-7-C-X600.0
Drawing No. ZT05-04-004
13 available combinations
Clear PRT® Heat Shrink Wrap
PRT®
Part No. ZT98-04-016-0-B-X600.0
Drawing No. ZT98-04-016
48 available combinations
Fix chafed wires with PRT® heat shrink wrap, an in-service, made from MIL-SPEC tubing, wrap-around heat shrink that protects electrical systems, assembled wires, and cables.
Z-Block® (100)
Part No. ZT02-03-002-2.0-X60.0-1U
Drawing No. ZT02-03-002
2 available combinations
High Flow Thermoplastic Hot-Melt Water-Blocking Adhesive (Up to 212°F)
Heat Shrinkable EMI Shielding
For a one step jacketing and shielding material
Zippertubing® heat shrinkable shielding products will conform to the shape of wires, cables even components of various sizes and shapes with the ability to shrink down to a ratio providing effective EMI hardening of electrical interconnect areas and end terminals. Our heat shrinkable products are uniquely engineered with a dual wall system; the outer material is strong and flexible Polyolefin heatshrink tubing with an inner liner of finely knitted mesh or conductive foil each with frequency specific features that reduce radiated interference by reflection and/or absorption.
Shrink-N-Shield® (7200)
Part No. ZT15-18-001-0.1875-B-X48.0
Drawing No. ZT15-18-001
7 available combinations
A Non-Magnetic, Halogen-Free, Hypoallergenic, Conductive EMI-Shielded Cloth, within a 2:1 Polyolefin Heat Shrink Tubing.
Shrink-N-Shield® (3:1)
Part No. ZT16-18-003-0.75-B-X12.0-1U
Drawing No. ZT16-18-003
8 available combinations
One-Step Shielding and Jacketing Tubing, 3:1 Shrink Ratio, Polyolefin
Shrink-N-Shield® (4:1)
Part No. ZT16-18-002-0.75-B-X12.0-1U
Drawing No. ZT16-18-002
6 available combinations
One-Step Shielding and Jacketing Tubing, 4:1 Shrink Ratio, Polyolefin
PRT® (S-3250)
Part No. ZT98-04-017-0-B-X600.0
Drawing No. ZT98-04-017
32 available combinations
PRT® Heat Shrink Wrap w/ EMI Shielding
PRT® (1553-100)
Part No. ZT11-KT-001-01
Drawing No. ZT11-KT-001
3 available combinations
Environmentally Sealed PRT® w/ EMI Shielding (<100°C)
Shrink-N-Shield® (PVDF)
Part No. ZT02-18-001-0.1875-C-X48.0
Drawing No. ZT02-18-001
6 available combinations
One-Step Shielding and Jacketing Tubing, 2:1 Shrink Ratio, Polyvinylidene Fluoride Tubing
Shrink-N-Shield® (2:1)
Part No. ZT99-18-006-0.1875-B-X48.0
Drawing No. ZT99-18-006
7 available combinations
One-Step Shielding and Jacketing Tubing, 2:1 Shrink Ratio, Polyolefin
PRT® (1553-135)
Part No. ZT04-KT-001-01
Drawing No. ZT04-KT-001
9 available combinations
Environmentally Sealed PRT® w/ EMI Shielding (<135°C)
Shrink-N-Shield® (FE)
Part No. ZT03-18-003-0.1875-B-X48.0
Drawing No. ZT03-18-003
7 available combinations
One-Step Shielding and Jacketing Tubing, 2:1 Shrink Ratio, High Temperature Fluoroelastomer
Shrink-N-Shield® (2X)
Part No. ZT01-18-003-0.1875-B-X48.0
Drawing No. ZT01-18-003
10 available combinations
One-Step Shielding and Jacketing Tubing, 2:1 Shrink Ratio, Polyolefin, Double Shield Layer
Shrink-N-Shield® (HW)
Part No. ZT04-18-002-01-B-X48.0
Drawing No. ZT04-18-002
10 available combinations
One-Step Shielding and Jacketing Tubing, 3:1 Shrink Ratio, Polyolefin, Heavy Wall Tubing
Shrink-N-Shield® (TW)
Part No. ZT02-18-003-0.1875-B-X48.0
Drawing No. ZT02-18-003
7 available combinations
One-Step Shielding and Jacketing Tubing, 2:1 Shrink Ratio, Polyolefin, Thin Wall Tubing
PRT® (S-7200)
Part No. ZT14-04-005-0-B-X600.0
Drawing No. ZT14-04-005
16 available combinations
PRT® Heat Shrink Wrap w/ Non-Magnetic EMI Shielding
