Z-Coil Installation Tool

$10.49

A tool utilized to assist in the opening of Z-Coil™ and the aligning of wires or cables during installation.

Drawing Number(s): ZT19-97-008

Z-Coil Installation Tool

Select product options

Selected Part Number:ZT19-97-008-0.1875-BL
Z-Coil Installation Tool
  • Guides and aligns wire or cable bundles through Z-Coil™
  • Glides effortlessly for quick installation time
  • Available in different sizes depending on Z-Coil™ diameter size

The Z-Coil™ Tool is a plastic gliding tool used to assist in opening Z-Coil™ and with easy placement of wires or cables inside. The Z-Coil™ Tool comes in four sizes. Your Z-Coil™ diameter size will depend on what size you will need: 5mm is fit for 0.1875”, 10mm for 0.3125” to 0.375”, 16mm for 0.5” to 0.625”, and 19mm for 0.75” to 1”.

Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © The Zippertubing® Company, Chandler, Arizona.
SLR Slider - R-Track Installation Tool    SLD Slider - D-Track Installation Tool
NAME SLR SLIDER - R-TRACK INSTALLATION TOOL    SLD SLIDER - D-TRACK INSTALLATION TOOL
DESCRIPTION A slider tool engineered to close R-Track pressure track products.    A slider tool engineered to close D-Track LT pressure track products.
Closure    
RoHS    
Abrasion Resistance    
Installation Type    
Purpose    
Min Temperature    
Minimum Operating Temperature °F    
Max Temperature    
Maximum Operating Temperature °F    
Flexibility    
View  View  View

Z-Coil Installation Tool

A tool utilized to assist in the opening of Z-Coil™ and the aligning of wires or cables during installation.

Drawing Number(s): ZT19-97-008

Selected Part Number: ZT19-97-008-0.1875-BL

  • Guides and aligns wire or cable bundles through Z-Coil™
  • Glides effortlessly for quick installation time
  • Available in different sizes depending on Z-Coil™ diameter size
  • Z-Coil Installation Tool

    Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © The Zippertubing® Company, Chandler, Arizona.

    Z-Coil Installation Tool

    MATERIAL SPECIFICATIONS

    Product Recommendations

    Recently viewed