SLR Slider

$7.92

A slider tool engineered to close R-Track pressure track products.

Drawing Number(s): SLR

Select product options

Selected Part Number:SLR

Overview

SLR Slider
  • Ideal for shorter cable runs
  • Reduces fatigue of installation
  • Utilized to assist in the closure of the R-Track pressure tracks

The SLR tool is an inexpensive metal ring slider designed for closing Zippertubing® R-Track products. It is ideal for both production line and field installations. The R-Track closure mechanism can be closed manually using thumb pressure in most flat ribbon cable applications. However, use of the SLR tool makes closing long cable runs easier, eliminates operator fatigue and minimizes sore fingers. The SLR tool is best suited for R-Track jackets which are to be installed on round wire and cable bundles. Round cable bundles do not provide the operator with a solid surface to apply thumb pressure like flat cables do. Track closure is achieved by inserting the upper and lower halves of the R-Track interlock into the tool and then pulling the tool down the cable run. The tool will form the jacket around the cable, snap the interlock together and close the tubing. Refer to the "SLR Tool Instructions" located under the additional information.

Specifications

Overall Performance

    Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © The Zippertubing® Company, Chandler, Arizona.

    SLR Slider

    A slider tool engineered to close R-Track pressure track products.

    Drawing Number(s): SLR

  • Ideal for shorter cable runs
  • Reduces fatigue of installation
  • Utilized to assist in the closure of the R-Track pressure tracks
  • SLR Slider

    SLR Slider

    MATERIAL SPECIFICATIONS

    Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © The Zippertubing® Company, Chandler, Arizona.

    Recently viewed