SLD Slider


A slider tool engineered to close D-Track LT pressure track products.

Drawing Number(s):

Select product options

Selected Part Number:


SLD Slider
  • Ideal for shorter cable runs
  • Reduces fatigue of installation
  • Utilized to assist in the closure of the D-Track LT pressure tracks

The SLD tool is an inexpensive plastic slider tool designed for closing Zippertubing® D-Track-LT products. It is primarily intended for use in low volume production line applications or field installations. The tool engages the external ears of the D-Track-LT extrusion and snaps the interlock together as it is slid along the cable run. This tool makes closing D-Track-LT fast and easy while minimizing operator fatigue. The tool is used after squeezing the two track halves together manually with your fingers at the end of the jacket. The tool is then slid onto this short section of pre-closed track. The tool is pulled along the cable run which pre-forms the jacket around the cable, snaps the interlock together and forms closed continuous tubing. For closing large quantities of D-Track or long run lengths we suggest using the ZTD-SP plier tool.


Overall Performance

    Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © The Zippertubing® Company, Chandler, Arizona.

    Similar products

    SLR Slider Z-Coil™ Tool
    DESCRIPTION A slider tool engineered to close R-Track pressure track products. A tool utilized to assist in the opening of Z-Coil™ and the aligning of wires or cables during installation.
    Abrasion Resistance
    Installation Type
    Min Temperature
    Minimum Operating Temperature °F °F °F
    Max Temperature
    Maximum Operating Temperature °F °F °F
    View View View

    Recently viewed