SL-EZ Slider

$10.32

A slider tool engineered to close EZ-Track® pressure track products.

Drawing Number(s):

RoHS

Select product options

Selected Part Number:

Overview

SL-EZ Slider
  • Ideal for shorter cable runs
  • Reduces fatigue of installation
  • Utilized to assist in the closure of the EZ-Track® pressure tracks

The SL-EZ tool is an inexpensive plastic slider tool designed for closing Zippertubing® EZ-Track products. It is primarily intended for use in low volume production line applications or field installations. The tool engages the external ears of the EZ-Track extrusion and snaps the interlock together as it is slid along the cable run. This tool makes closing EZ-Track fast and easy while minimizing operator fatigue. The tool is used after squeezing the two track halves together manually with your fingers at the end of the jacket. The tool is then slid onto this short section of pre-closed track. The tool is pulled along the cable run which pre-forms the jacket around the cable, snaps the interlock together and forms closed continuous tubing.

Specifications

Overall Performance

  • RoHS: RoHS-6
Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © The Zippertubing® Company, Chandler, Arizona.

Similar products

SLR Slider SLD Slider Z-Coil™ Tool
NAME SLR SLIDER SLD SLIDER Z-COIL™ TOOL
DESCRIPTION A slider tool engineered to close R-Track pressure track products. A slider tool engineered to close D-Track LT pressure track products. A tool utilized to assist in the opening of Z-Coil™ and the aligning of wires or cables during installation.
Closure
RoHS
Abrasion Resistance
Installation Type
Purpose
Min Temperature
Minimum Operating Temperature °F °F °F
Max Temperature
Maximum Operating Temperature °F °F °F
Flexibility
View View View

SL-EZ Slider

A slider tool engineered to close EZ-Track® pressure track products.

Drawing Number(s):

Selected Part Number:

  • Ideal for shorter cable runs
  • Reduces fatigue of installation
  • Utilized to assist in the closure of the EZ-Track® pressure tracks
  • SL-EZ Slider

    SL-EZ Slider

    MATERIAL SPECIFICATIONS

    Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © The Zippertubing® Company, Chandler, Arizona.

    Recently viewed