Polyacetal Snap Buttons

Thumb Pressure Snap Buttons

Material Specification: 3013

Select product options

Raw materials are not available for standalone purchase; instead, they are intended to be integrated into a tailor-made, custom-engineered solution. Explore the possibilities below or contact an engineer to start your custom application today!

Overview


    The Snap Button closure is a cost effective, re-enterable jacket closure system for cable management applications. These snaps are made of UL94 equivlant flame-retardant materials; they are approximately 3/8" in diameter and have with hoop strengths of approximately 10 lbs/snap for polyacetal. The polyacetal snaps are White/Grey in color and are intended for light duty and low cost cable management applications.

    Specifications

  • Closure: Snap
  • Color: Gray
  • Material: Polyacetal
  • RoHS: RoHS-10
  • Closure Strength: >9.8N after 300 cycles @ 73°F & 65% RH
  • Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © The Zippertubing® Company, Chandler, Arizona.
    ZT-Zippertubing

    Polyacetal Snap Buttons

    Thumb Pressure Snap Buttons

    Material Sprcification: 3013

      WARNING: Raw materials are not sold separately, please contact the sales department for any special requirements.

      SPECIFICATIONS

    • Closure: Snap
    • Color: Gray
    • Material: Polyacetal
    • RoHS: RoHS-10
    • Closure Strength: >9.8N after 300 cycles @ 73°F & 65% RH
    • DESCRIPTION

      The Snap Button closure is a cost effective, re-enterable jacket closure system for cable management applications. These snaps are made of UL94 equivlant flame-retardant materials; they are approximately 3/8" in diameter and have with hoop strengths of approximately 10 lbs/snap for polyacetal. The polyacetal snaps are White/Grey in color and are intended for light duty and low cost cable management applications.

      Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © The Zippertubing® Company, Chandler, Arizona.

      Material Recommendations

      Recently viewed