|Break Strength||1,200 x 1000 N/3cm|
|Flame Retardant||JFA F-23169 (similar to UL94, VTM -0)|
|Material Type||Polyvinylchloride Impregnated PET|
|Temperature Range||-15° to 60°C (5° to 140°F)|
|PRODUCT WARNING Hook-It-RP Warning||This product poses no environmental or human health risks. Installers should wear gloves and long sleeve shirt. Avoid contact with skin and eyes.|
|Shape of Installation||Round|
|Cable Diameter||0.5" 0.75" 1.0" 1.125" 1.5" 2.0" 2.75" 4.0"|
|Unit Length||82 ft. roll|
|Exterior Material||PVC Impregnated PET|
Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2018 The Zippertubing® Company, Chandler, Arizona.
Are you having issues with your wires or cables being destroyed or damaged by rodents? If so, than Zippertubing’s Hook-It® (RP) product is the right product to protect your wires or cables from those pesky varmints.
Hook-It® (RP) protects your valuable:
Hook-It® (RP) was engineered as an affordable, rodent-repellent cable and wire management system for either round, square or even flat cables. Comprised of Capsaicin-impregnated, PVC (Polyvinyl Chloride)-coated, PET (Polyester) fabric gray jacketing, the product is the perfect choice for any location where your valuable wires or cables are being chewed or bitten. Protect your warehouse, garage, basement, ducts or virtually any other area where rats, mice, gophers, squirrels, muskrats or any other rodent is hindering the normal operating of your household or business.
This product utilizes a hook-and-loop closure so that, when needed, you or your team can easily access the wires or cables underneath for inspection or replacement. The huge benefit of using a hook-and-loop closure rather than a pull through sleeve is that you do not need to disconnect your components during the installation process. This could drastically save you or your company time and money.
Hook-It® (RP) comes on a roll as an 82-foot solution, and can be easily cut to any length with scissors or a hot knife. The product is available in a multitude of sizes to cover a broad range of wire or cable diameters, shapes, configurations, conditions and bends.
The product also poses no environmental or human health risks, however when installing Hook-It® (RP) it's best to wear some form of protection on the parts of your body that may come into contact with it.
Looking for something particular that you are not finding on our website? Contact us today at (855) 289-1874 so that we can help solve your specific problem.
Sign up for our email list to stay up to date with all the latest and greatest at The Zippertubing Company.