Snap-Grip® is a commercial-grade, flame-retardant, PVC-coated Polyester fabric material that utilizes a unique Nylon snap button closure system. The snap button design will stay closed in high flexing applications, yet it is easy to close and open as required. Just press the buttons closed for a secure covering for any wire or cable bundle. Since no tooling is required for installation, Snap-Grip® is ideal for general cable management applications in office or industrial locations where multiple wires or cables penetrate cabinets, equipment housings or internal wiring of appliances. The separation between the snaps allows for easy cable breakouts and transitions within a wire harness. Also available with SH1 Aluminum foil EMI shield with a 15 AWG Tin/Copper drain wire that provides good EMI shielding performance at an economical price.
|Shape of Installation||Round|
|Cable Diameter||0.75" 1.0" 1.125" 1.5" 2.0" 2.75"|
|Unit Length||82 ft. roll|
|Closure||Stainless Steel Snaps|
|Temperature Range||-50° to 240°C (-58° to 464°F)|
|Tear Strength||>650/>600 N/cm (warp) | >550/>400 N/cm (fill)|
|Configuration||Aluminized Silicone-Coated Woven Fiberglass|
|Material Thickness Variance||-0.003" to +0.005"|
Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitabilituriy for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2018 The Zippertubing® Company, Chandler, Arizona.
Snap-Grip® (SAM-1000) is a rugged, cut-to-length, self-extinguishing, heat-reflective aluminum-silicon-coated fiberglass cable-management solution. The self-extinguishing, heat-reflective, aluminum-silicon-coated fiberglass is perfect for the automotive industry.
This sleek product not only protects your valuable components from heat, but because Snap-Grip® (SAM-1000) is so rugged, it’s also perfect as an abrasion-protection cable management solution. The heavy-duty stainless steel snaps make Snap-Grip® (SAM-1000) easy, yet versatile, to install for just about anyone in any location.
The material used in Snap-Grip® (SAM-1000) has been tested to SAE J2302 requirements.
If you are in need of a solution that will protect your automobile’s wires or cables from whatever elements are hindering its operation, then chose The Zippertubing Company’s products to fix it.
Sign up for our email list to stay up to date with all the latest and greatest at The Zippertubing Company.