Shrink N Shield Hw - Shrink N Shield - Trade Names - ZT | Zippertubing Co.
Zippertubing has been building quality products and solutions since 1957 image Building Quality Products & Solutions Since 1957

Shrink-N-Shield®

Shrink-N-Shield® combines two proven technologies into a single, easy-to-install product for adding EMI protection to smaller wire and cable bundles. Shrink-N-Shield® makes adding an EMI shield and secondary insulation jacket to wire or cable bundles a snap.

This product is supplied in four-foot-long sticks and has a length tolerance of +/- 1/2 inch. These products feature an adhesive-bonded Z-3250-CN EMI shield that provides excellent shielding (10 MHz to 20 GHz)

Shrink-N-Shield® (HW)

Drawing No. ZT04-18-002

Part No. ZT04-18-002-01-B-X48.0

One-Step Shielding and Jacketing Tubing, 3:1 Shrink Ratio, Polyolefin, Heavy Wall Tubing

  • Easy One-Step installation
  • High Performance MIL Spec Jacketing
  • Excellent High Frequency EMI Shielding
  • Thick, Heavy Wall Polyolefin Jacket
  • Lower Total Installed Cost

Shape of Installation

Round

Diameter Before Shrinkage

Unit Length

Exterior Material

Shielding

Material Color

Quantity:

-+

Shrink-N-Shield (HW) combines two proven technologies into a single, easy to install product for adding EMI shield protection to wire and cable bundles with diameters of 1/2" and less. Makes adding an EMI shield or secondary EMI shielding to wire and cable a snap. This product is comprised of SAE-AMS-DTL-23053/15 (w/o the adhesive layer) heat shrink tubing and Zippertubing's Z-3250-CN conductive cloth which has outstanding shielding properties. It is ideal for applications where thick, heavy wall insulation is needed for superior mechanical protection. This product has an operational temperature range of -55 to 110°C. This product is supplied in four foot long sticks.

Related Products

Product Specifications

Shelf Life 60 months
RoHS Compliant

Available Attributes

Please contact us for custom needs. We have a solution for you!

Shape of Installation Round
Diameter Before Shrinkage 0.35" (#01) 0.40" (#03) 0.75" (#05) 1.1" (#07) 1.5" (#09)
Unit Length 4 ft. Sticks
Exterior Material Heavy Wall Heat Shrink (3:1)
Shielding Z-3250-CN
Material Color Black Red
Shielding Effectiveness

Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitabilituriy for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2018 The Zippertubing® Company, Chandler, Arizona.

Speak to an Engineer Today!

We have highly experienced and friendly engineers on site ready to assist you in all your projects