ISO/TS 16949 ISO 9001
Building Quality Products & Solutions Since 1957

PRT®

PRT® is a wrap-around, heat-shrinkable tubing that provides a means of adding additional insulation to an assembled wire or cable. PRT® can be used to protect in-service electrical systems without the need to remove or disassemble the associated connectors and end hardware. This product is also a great in-service repair tubing where a side-entry installation is required.

A heat gun is used to recover the material in a fashion similar to standard, non-split, heat-shrinkable tubing. This material has an operational temperature range of -55° to 135°C (-67° to 275°F).

PRT® with Part Number: ZT98-04-016-0-B-X600.0

PRT®

Drawing No. ZT98-04-016

Part No. ZT98-04-016-0-B-X600.0

Fix chafed wires with PRT® heat shrink wrap, an in-service, made from MIL-SPEC tubing, wrap-around heat shrink that protects electrical systems, assembled wires, and cables.

  • Never disconnect or pull through another wire or cable again
  • Excellent anti abrasive, environmental, chemical, and electrical properties with resistance to most oils and fluids, mild acids, and alkalis
  • Many PRT® sizing variations also offer National Stock Numbers (NSN)

Shape of Installation

Round

Cable Diameter - After Shrinkage

Unit Length

Exterior Material

Closure

Material Color

Quantity:

-+

Product Specifications

Shelf-Life 24 months
RoHS Compliant
Minimum Operating Temperature -67 ° F (-55 ° C )
Flammability UL224, VW-1, Self-extinguishing
Maximum Operating Temperature 275 ° F (135 ° C )

Available Attributes
Please contact us for custom needs. We have a solution for you!

Shape of Installation Round
Cable Diameter - After Shrinkage 0.090" - 0.124" (#0) 0.125" - 0.187" (#1) 1.13" - 1.24" (#10) 1.25" - 1.37" (#11) 1.38" - 1.49" (#12) 1.50" - 1.62" (#13) 1.63" - 1.74" (#14) 1.75" - 1.87" (#15) 0.188" - 0.249" (#2) 0.25" - 0.37" (#3) 0.38" - 0.49" (#4) 0.50" - 0.62" (#5) 0.63" - 0.74" (#6) 0.75" - 0.87" (#7) 0.88" - 0.99" (#8) 1.0" - 1.12" (#9)
Unit Length 50 ft. Roll
Exterior Material Polyolefin Heat Shrink
Closure Adhesive
Material Color Black Green White

Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitabilituriy for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2018 The Zippertubing® Company, Chandler, Arizona.

PRT® has passed all short-term submersion tests and holds up to the harshest fluids, including jet fuel, Skydrol, and many others.

PRT® is made from a MIL-SPEC tubing, that is flame-retardant, RoHS, UL-rated, wrap-around heat-shrink that provides a means of repairing in-service wires or cables damaged from chafing. It can also be used as a secondary protection installation for applications that require additional protection.

The best part of the PRT® line of products is that you’ll never again need to remove or disassemble your connectors or end hardware to install.

Once installed, the PRT® wrap-around solution is very similar to conventional heat-shrink tubing, as it is shrunk using a heat gun. The major difference is that it is a wrap-around solution that can be cut specifically to your repair length and offers itself as an in-service repair tool for both indoor and outdoor applications. While many military branches use this product, it can also be used as a reliable solution in virtually any other industry, including the automotive and aerospace industries, and is suitable for both industrial and commercial uses.

PRT® has passed all short-term submersion tests and holds up to the harshest fluids, including jet fuel, Skydrol, and many others. This product has been used in the field by the military since 1998 and is still used today as the top-choice product to repair and protect many sizes of wires and cables.

A heat gun is used to re-cover the material in a fashion similar to standard, non-split, heat-shrinkable tubing. This material has an operational temperature range of -55° to 135°C (-67° to 275°F).

Benefits

  • Made from a MIL-SPEC (M23053/5) tubing, this wrap-around heat shrink that provides a secondary insulation layer, perfect for in-service repairs
  • Available in in six color options and a multitude of diameters with National Stock Numbers (NSN)
  • Features

  • Handles up to 17,500 volts and is resistant to the harshest fluids, including jet fuel, Skydrol, and many others
  • A flame-retardant solution that has been proven through military field use since 1998
  • Speak to an Engineer Today!

    We have highly experienced and friendly engineers on site ready to assist you in all your projects