Connector Cover™ while available in many different shape options including hexagonal and rectangular, many of these products are available in five standard trapezoidal shapes. They are intended to minimize dirt and fluid exposure on critical interconnect components. This product is a .020" thick high-temperature PVC jacket material that meets Mil-I-631D, Type F, Form S, Grade C, Class 1 and incorporates an easy to use R-Track® thumb-pressure closure.
When used in conjunction with Zippertubing's Zip-On® (63) cable jacketing they can create a fully enclosed cable jacket assembly. The covers have good fluid resistance properties and offer a wide variety of temperature ranges.
Zippertubing's Connector Covers are hexagonal, rectangular or trapezoidal-shaped products that are widely used to minimize fluid and dirt exposure on any critical interconnect components. They are available in many sizes, materials, and closure types. Depending on your needs, Connector Covers are available with or without thermal protection and/or EMI shielding.
This particular type of Connector Cover is the perfect solution for components that are exposed to large amounts of heat for long periods of time. Connector Cover (ALP-500) is comprised of Zippertubing's ALP-500 heat-reflecting material, snap-button closure (re-open whenever necessary), and sewn with Kevlar thread to properly hold the product together under extreme temperatures. The operational temperature range of Connector Cover (ALP-500) is -58° to 350°F.
When Connector Covers are combined with Zippertubing's many cable, EMI, or thermal protective products they become the perfect solution to continue that protective barrier throughout your wire or cable bundle. When protecting your whole wire or cable bundle, the best paring to the Connector Cover (ALP-500) would be Zippertubing's rugged, snap-button closure product Snap-Grip® (SAM-1000) and its flexible, heat-reflective tape HeatReflect® (ALP).
About ALP-500: A low-cost, medium-weight, polyurethane-coated fiberglass fabric with an aluminum foil surface on one side. This flexible material provides a thermal effectiveness value of 149.72°F when tested to SAE J2302 requirements.
|Minimum Operating Temperature||-58 ° F (-50 ° C )|
|Maximum Operating Temperature||350 ° F (177 ° C )|
Please contact us for custom needs. We have a solution for you!
|Shape of Installation||Round|
|Closure||Stainless Steel Snaps|
|Trapezoid Size||4.0" x 9.0" Trapezoid|
|Thread Type||Kevlar Thread|
|Temperature Range||-50° to 180°C (-58° to 356°F)|
|Tear Strength||>350 daN/50 mm (warp) | >250 daN/50 mm (fill)|
|Material||Spun para-Aramid filaments|
|Flame Retardant||Decomposes at 448°C|
|Temperature||210°C max. operational Short spikes to 250°C Decomposition at 448°C|
|Break Strength||16 lbs-min|
|Finish||Soft, No bonding|
Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitabilituriy for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2018 The Zippertubing® Company, Chandler, Arizona.