How to install Shrink-N-Shield ®
What is Shrink-N-Shield ®? Shrink-N-Shield ® combines two proven technologies into a single, easy-to-install product for adding EMI protection to smaller wire and cable bundles. Shrink-N-Shield ® makes adding an EMI shield and secondary insulation jacket to wire or cable bundles a ...
Read More →Track Closure vs Bend Location for all Zippertubing tracks
Installation Notes: Always size the Zippertubing jacket at least 1/8 inch larger than the maximum cable diameter. If severe cable bending is anticipated, increasing jacket diameter beyond the 1/8 inch requirement is advisable. Always install Zippertubing jackets so that the track faces...
Read More →Hose, Wire & Cable Management
Case Study: Hose, Wire & Cable Management Product: VNH-23 Cable Jacket Problem: Hose, wire, and cable management and protection has always been a big problem at private yacht and boating marinas. Typically with yachts or larger boats there are bulky wire bundles that reach ...
Read More →New EMI Shielding Cloth
Featured Conductive EMI Shield Cloth The Zippertubing Z-7200-C EMI Shield Cloth is a new addition to our ever expanding EMI materials. This material offers many benefits over other shields in that is also extremely flexible, durable and fray resistant. ...
Read More →Heat Reflective Products
High Temp Heat Reflective Jacketing Now Available Chandler, AZ - The Zippertubing® Co. is proud to announce the addition of several new Heat Reflective products to it’s product line. Heat reflective products are designed to provide moderate to severe temperature heat barrier protec...
Read More →Flex-Shield (HP) ®
High Temperature EMI Shielding Braided Expandable Sleeving Now Available Chandler, AZ - The Zippertubing Co. is proud to announce the addition of Flex-Shield ® (HP), a new high-performance EMI shielding, expandable braid product that is economical, extremely flexible, lightweight and has...
Read More →How to install the R-Track
What is R-Track? The R-Track closure is a small PVC based “Zip-Lock” style closure that is approximately 0.150” wide which can be utilized with all PVC based jacket materials. The interlock has an approximate hoop strength of 10 lbs/linear-inch and is flame retardant. R-Track can...
Read More →How to install Moored & Towed Cable Fairings
IntroductionLet's start out by explaining why you may use Marine Fairings to cover your wires & cables.Because normal water movement and turbulence creates noise and vibrations which can distort or destroy signals from instruments, similar to the interference caused by EMI/RFI, Zippertu...
Read More →How to Inspect Zippertubing Products
All Zippertubing Company tubular jacket products have finished dimensional tolerances as shown in Table 1. All tolerances are specified on the individual Zippertubing engineering drawings and reference the Zippertubing standard tolerance drawing: ZT93-98-004. Table 1. Zippertubing Standard Tolerance...
Read More →EMI Shielding Delivery System
The Easiest EMI Shielding Delivery System Available Chandler, AZ. - Since 1957 The Zippertubing Co. has been specializing in side-entry or wrap-around protection from EMI/RFI interference. Because of the side-entry capability of Zippertubing, additional protection from external EMI/RFI noise can eas...
Read More →