Mon-Thurs: 6:30AM-4:00PM MST
Friday: 6:30AM-10:30AM MST

Home About Contact Products Materials 2020 Catalog

ISO 9001 / IATF 16949

Building Quality Products & Solutions since 1957

Products
Materials

Browse All Materials
Jacketing EMI Shielding Thermal Management Closure Options Straps and Fasteners Wire Terminal and Ground Wires
About

Capabilities Industries
Contact
Login

ISO 9001 / IATF 16949 | Catalog

(855) 289-1874

Home

Tech Tips

Universal Robots Cable-Management Sleeve

PROBLEM:A customer needed an inexpensive, universal robots cable-management solution for electrical and pneumatic lines that run from the base of a 6-Axis, collaborative, robotic arm to the tool head. The robotic arm range of motion, as well as the size and quantity of control lines runn...

Posted 3 years ago

Tape Wrapping Wire & Cable Harnesses Guide

This document describes generic methods for applying Insulating, Thermal or EMI Tape materials. It applies to all tape materials which can be helically wound around a wire and cable bundle. The methods described are typical of industry installations and may or may not apply to customer-specific inst...

Posted 4 years ago

Missile Canard Retention Sleeve

PROBLEM:A military customer requested an inexpensive solution to retain missile canards in a retracted condition while missiles were in storage crates and attached to Helicopter launch pylons prior to flight. The part needed to be disposable, yet able to withstand all military operation environments...

Posted 4 years ago

Tips to Save You Time and Money

Water Block Your Wires And Save! Z-Block™ hot-melt adhesive tape creates an all-around environmental seal. Works great with ZT's Shrink-N-Repair® products.

Posted 4 years ago

Engineering Team

The collective expertise of our in-house engineering team can provide you with endless ways to solve your component issues and create a solution — everything from conceptualizing to final product.

Tim Mead

Scott Yee

Matt Hesselbacher

Jonathan Speirs

Madison Lenschow

Taylor Black

Tim Mead

Director of Operations

Tim earned his Bachelors of Science in Chemical Engineering from the University of Alabama in Huntsville. He has experience in the chemical processing industry optimizing throughput and efficiencies as well as experience in the aerospace and space industries where he worked on materials selection, design and processing for avionics, radar and satellite orientation systems. Tim is responsible for manufacturing operations and new process development.

Scott Yee

Engineer Manager

Scott earned his Bachelors of Science in Aerospace Engineering from Arizona State University in Tempe, AZ. He has experience in systems program management, aerospace systems, optical components, optical systems, semiconductor processing equipment, testing and R&D product development. Scott is currently responsible for overseeing design concepts, new product development and improvement of existing product lines.

Matt Hesselbacher

Principal Engineer

Matt earned his Bachelors of Science in Electrical Engineering from the University of Arizona in Tucson, AZ. He has many years of experience in the aerospace industry designing electrical subsystems and cable harnesses for missiles and satellite launch systems. Matt is currently responsible for product training, EMI shielding design, new product development, and legacy product support.

Jonathan Speirs

Senior Production Engineer

Jonathan earned his Bachelors of Science in Manufacturing Engineering Technology from Brigham Young University in Provo, UT. He has experience designing products, fixtures, gauges, and other manufacturing aids to ensure streamlined processing of material through each phase of production. Jonathan is currently involved in new product development, manufacturing support, and automotive tooling & fixture design.

Madison Lenschow

Design Engineer

Madison earned her Bachelors of Science in Mechanical Engineering from Northern Arizona University in Flagstaff, AZ. She has experience developing and testing mobility systems and prototype electro-mechanical systems. Madison is responsible for new product development, field support for product installations, and general product training.

Taylor Black

Material Engineer

Taylor earned his Bachelors of Science in Polymer Science & Engineering from Case Western Reserve University in Cleveland, OH. He has experience developing various material compounds and optimizing their performance characteristics by adjusting process parameters and incorporating additives. Taylor is responsible for new product and materials testing as well as material and process refinement based on industry specific requirements.

Tim Mead

Tim Mead

Director of Operations

Tim earned his Bachelors of Science in Chemical Engineering from the University of Alabama in Huntsville. He has experience in the chemical processing industry optimizing throughput and efficiencies as well as experience in the aerospace and space industries where he worked on materials selection, design and processing for avionics, radar and satellite orientation systems. Tim is responsible for manufacturing operations and new process development.
Scott Yee

Scott Yee

Engineer Manager

Scott earned his Bachelors of Science in Aerospace Engineering from Arizona State University in Tempe, AZ. He has experience in systems program management, aerospace systems, optical components, optical systems, semiconductor processing equipment, testing and R&D product development. Scott is currently responsible for overseeing design concepts, new product development and improvement of existing product lines.
Matt Hesselbacher

Matt Hesselbacher

Principal Engineer

Matt earned his Bachelors of Science in Electrical Engineering from the University of Arizona in Tucson, AZ. He has many years of experience in the aerospace industry designing electrical subsystems and cable harnesses for missiles and satellite launch systems. Matt is currently responsible for product training, EMI shielding design, new product development, and legacy product support.
Jonathan Speirs

Jonathan Speirs

Senior Production Engineer

Jonathan earned his Bachelors of Science in Manufacturing Engineering Technology from Brigham Young University in Provo, UT. He has experience designing products, fixtures, gauges, and other manufacturing aids to ensure streamlined processing of material through each phase of production. Jonathan is currently involved in new product development, manufacturing support, and automotive tooling & fixture design.
Madison Lenschow

Madison Lenschow

Design Engineer

Madison earned her Bachelors of Science in Mechanical Engineering from Northern Arizona University in Flagstaff, AZ. She has experience developing and testing mobility systems and prototype electro-mechanical systems. Madison is responsible for new product development, field support for product installations, and general product training.
Taylor Black

Taylor Black

Material Engineer

Taylor earned his Bachelors of Science in Polymer Science & Engineering from Case Western Reserve University in Cleveland, OH. He has experience developing various material compounds and optimizing their performance characteristics by adjusting process parameters and incorporating additives. Taylor is responsible for new product and materials testing as well as material and process refinement based on industry specific requirements.

Interested in new Products and Custom Solutions?
Sign Up Today for Our Latest News

Are You Ready to
Get Started?

Additional Information

Family of Companies
Distributors
Careers
Upcoming Events

Technical Data
Installation Instructions
Engineers Knowledgebase
Find a Part Number

Products Engineered
and Manufactured in Products Engineeredand Manufactured in the USA

(855) 289-1874

Tech Tips

Universal Robots Cable-Management Sleeve

Tape Wrapping Wire & Cable Harnesses Guide

Missile Canard Retention Sleeve

Tips to Save You Time and Money

Categories