Zip-On® (PVL) is a lightweight wrap around cable management jacketing with a soft, flexible, coated fabric texture for general purpose applications. The fabric reinforced construction makes it ideal for discrete cables, wire harnesses, hoses, and other applications where its high flexibility, strength and abrasion protection are needed. Zip-On® (PVL) is made from 10-mil thick Mil-C-43006, Type II, Class 1 flame retardant Polyvinylchloride impregnated Polyester fabric.
This product utilizes Zippertubing's versatile R-Track or Z-Track closure systems and the jacket material is available in six different color options (Black, White, Grey, Red, Yellow and Blue). The combination makes Zip-On® (PVL) easy to cut to size and perfect for circuit or system color code identification.
The material features good abrasion and fluid resistance with an operational temperature range of -20 to 82°C. Zip-On® (PVL) is supplied in standard form as a non-UL product, but it can be supplied as a recognized component with a Underwriters Laboratories UL224, VW-1 flammability rating. Zip-On® (PVL) can be configured for Round, Flat or Rectangular shaped cable groupings.
Refer to Zippertubing's PVL data sheet below for specific material characteristics.
|Minimum Operating Temperature||-4 ° F (-20 ° C )|
|Maximum Operating Temperature||176 ° F (80 ° C )|
|Flammability||UL224, VW-1, Self-extinguishing|
Please contact us for custom needs. We have a solution for you!
|Shape of Installation||Flat Round|
|Cable Diameter||0.375" 0.5" 0.625" 0.75" 0.875" 1.0" 1.125" 1.25" 1.375" 1.5" 1.625" 1.75" 1.875" 2.0" 2.125" 2.25" 2.375" 2.5" 2.625" 2.75" 2.875" 3.0" 3.125" 3.25" 3.375" 3.5" 3.625" 3.75" 3.875" 4.0"|
|Exterior Material||PVL-10 (UL Tested)|
|Closure||R-Track (PVC) Z-Track (PVC)|
|Material Overlap||Inside Overlap - IOL No Overlap Flap Outside Overlap - OOL|
|Tensile Strength||32 lbs|
|Fluid Resistance||Hydro Resist - 150 psi.|
|UL Recognition||UL224, VW-1 under UL file #E72210 w/ R-Track or Z-Track Closure|
|Temperature Range||-40° to 82°C (-40° to 179.6°F)|
|Tensile Strength||120 lbs/min (warp); 100 lbs/min (fill)|
|Mil-Spec||MIL-C-43006G, Type II, Class 1|
|External Closure Features||No|
|Used As A Single Extrusion||No|
|Tool Required||No (Slider Tool Available)|
|Shape of Installation||Round|
|Temperature Range||-20° to 105°C (-4° to 221°F)|
|Exterior Material||Polyvinyl Chloride (PVC)|
|Flame Retardant||V-0 / UL 94|
|Ideal Application||Flat jackets or smaller jackets that will see low stresses.|
|Bundle Size||Small - Medium (Typical Bundle Size: 1.5" or Smaller)|
|Roll Length||Up to 200 feet continuous|
Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitabilituriy for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2019 The Zippertubing® Company, Chandler, Arizona.