Lightweight, PVC-Coated Polyester Jacket, Snap Closure, 10 Mil
Snap-Grip® is a commercial-grade, flame-retardant, PVC-coated Polyester fabric material that utilizes a unique Nylon snap-button closure system.
The snap-button design stays closed in high flexing applications, yet it is easy to close and re-open as required. Just press the buttons closed for a secure covering for any wire or cable bundle. Since no tooling is required for installation, Snap Grip® is ideal for general cable management applications in office or industrial locations where multiple wires or cables penetrate cabinets, equipment housings or internal wiring of appliances. The separation between the snaps allows for easy cable breakouts and transitions within a wire harness.
This product is also available with an Aluminum foil EMI shield with a 15 AWG Tin/Copper drain wire. >> Learn more
|Arc Resistance||12 sec @ 12.5Kv|
|Tensile Strength (Tongue)||17.75lbs.warp & 13.25lbs. fill|
|Surface Resistance (500v)||1.6 x 10-14 ohms-sq/cm.|
|Tensile Strength (Grab)||99.25 lbs. (warp & fill)|
|Elongation||30% (warp & fill)|
|Dielectric Constant||3.34 @ 50 Hz|
|Minimum Operating Temperature||-40|
|Maximum Operating Temperature||179|
|Shape of Installation||Round|
|Cable Diameter||0.375" 0.5" 0.75" 1.0" 1.125" 1.5" 2.0" 2.75" 4.0"|
|Unit Length||100 ft. Roll 164 ft. Roll 50 ft. Roll Custom Length|
|Exterior Material||Snap-Grip Jacket|
Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2018 The Zippertubing® Company, Chandler, Arizona.