ISO 9001 / IATF 16949

7150 W. Erie St, Chandler, AZ 85226, USA

(855) 289-1874




Drawing No. ZT17-07-012

 product image

Bundle and pull through bundles of electrical, network, or fiber-optic wires with Zippertubing’s Quick-Feed® pull-through sleeve.

Do you have electrical, network, or fiber-optic wires that you’re trying to run through a piece of conduit or through an area that requires the wires to be bundled together, routed, and pulled through?

Zippertubing’s Quick-Feed® pull-through sleeve will allow you to navigate conduits or similar areas by gathering together, securing, and protecting your cable or wire bundles, providing a lasting, cost-effective solution.

Our Quick-Feed® is manufactured with durable polypropylene webbing, sewn together with nylon thread in various color options. The integrated handle allows you to hook onto the bundle and traverse your cable routing system by hand, connecting rod, or other method.

Our only consumable is a simple zip tie, which can be inserted into an opening at one end of the sleeve to ensure the wires do not get pulled from the bundle. This system allows you to bypass the need for excessive amounts of tape and the hassle of cleaning up the residue it leaves behind.

Simply place your cables and wire in the Quick-Feed®, zip it together, and cinch the zip tie on the opposite end to secure the cables and wires as you pull them through your system.

For added protection, we also offer an optional conduit sleeve that can be permanently sewn into the jacketing to help protect the fragile connector ends in your bundle, especially in high-traffic areas such as construction zones.

No matter how you intend to use Zippertubing’s Quick-Feed® pull-through sleeve, you’ll find it to be the perfect solution for safely pulling your cables and wires through your conduit systems.

Product Specifications

Minimum Operating Temperature
0 ° F (-18 ° C )
Maximum Operating Temperature
266 ° F (130 ° C )

Available Attributes
Please call us at (855) 289-1874 for any custom needs. We have a solution for you!

Shape of Installation
Cable Diameter
Unit Length
5' 6"
Exterior Material
Polypropylene Belt Webbing (PPW)
Black Nylon Zipper
Thread Type
Nylon Gray Thread

Material Specifications

PPW (50)

Material Thickness
1ft @ 0.018lbs
Specific Gravity
Abrasion Resistance
Break Strength
600 lb. Min./in

Zipper (Nylon)

Woven Polyester, 5/8 inch & 3/4 inch wide
Tooth Size
5, 10 and 15 mm
Plastic (metal when applicable)
Black Standard (custom colors available)
Single, Locking, Plastic (metal when applicable)
Break Strength
30-75 lbs. l/in (varies with size)
Single, Locking, Plastic (metal when applicable)
Molded Derlin® Plastic, Tooth
Fixed (w/ Pin & Box & Stops)

Sewn (Nylon Thread)

26% max
VT-295, Type II, Class A
Tensile Strength
11.8 lbs min.
Bonded, twisted Polyamide filaments
Flame retardant, melts
Black, White others available upon request

Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitabilituriy for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2019 The Zippertubing® Company, Chandler, Arizona.