ISO 9001 / IATF 16949

7150 W. Erie St, Chandler, AZ 85226, USA

(855) 289-1874



 product image


Drawing No. ZT17-07-012

Bundle and pull through bundles of electrical, network, or fiber-optic wires with Zippertubing’s Quick-Feed® pull-through sleeve.

Do you have electrical, network, or fiber-optic wires that you’re trying to run through a piece of conduit or through an area that requires the wires to be bundled together, routed, and pulled through?

Zippertubing’s Quick-Feed™ pull-through sleeve will allow you to navigate conduits or similar areas by gathering together, securing, and protecting your cable or wire bundles, providing a lasting, cost-effective solution.

Our Quick-Feed™ is manufactured with durable polypropylene webbing, sewn together with nylon thread in various color options. The integrated handle allows you to hook onto the bundle and traverse your cable routing system by hand, connecting rod, or other method.

Our only consumable is a simple zip tie, which can be inserted into an opening at one end of the sleeve to ensure the wires do not get pulled from the bundle. This system allows you to bypass the need for excessive amounts of tape and the hassle of cleaning up the residue it leaves behind.

Simply place your cables and wire in the Quick-Feed™, zip it together, and cinch the zip tie on the opposite end to secure the cables and wires as you pull them through your system.

For added protection, we also offer an optional conduit sleeve that can be permanently sewn into the jacketing to help protect the fragile connector ends in your bundle, especially in high-traffic areas such as construction zones.

No matter how you intend to use Zippertubing’s Quick-Feed™ pull-through sleeve, you’ll find it to be the perfect solution for safely pulling your cables and wires through your conduit systems.

Product Specifications

Minimum Operating Temperature 0 ° F (-18 ° C )
Maximum Operating Temperature 266 ° F (130 ° C )
Flexibility Best

Available Attributes
Please call us at (855) 289-1874 for any custom needs. We have a solution for you!

Shape of Installation Round
Cable Diameter 1.125"
Unit Length 5' 6"
Exterior Material Polypropylene Belt Webbing (PPW)
Closure Black Nylon Zipper
Thread Type Nylon Gray Thread

Material Specifications

PPW (50)

Material Thickness 0.050"
Weight 1ft @ 0.018lbs
Specific Gravity 0.91
Abrasion Resistance Good
Break Strength 600 lb. Min./in

Zipper (Nylon)

Tape Woven Polyester, 5/8 inch & 3/4 inch wide
Tooth Size 5, 10 and 15 mm
Stops Plastic (metal when applicable)
Colors Black Standard (custom colors available)
Slider Single, Locking, Plastic (metal when applicable)
Break Strength 30-75 lbs. l/in (varies with size)
Slider Single, Locking, Plastic (metal when applicable)
Tooth Molded Derlin® Plastic, Tooth
Configuration Fixed (w/ Pin & Box & Stops)

Sewn (Nylon Thread)

Elongation 26% max
Size TEX-90
Ratings VT-295, Type II, Class A
Tensile Strength 11.8 lbs min.
Material Bonded, twisted Polyamide filaments
Flammability Flame retardant, melts
Color Black, White others available upon request

Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitabilituriy for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2018 The Zippertubing® Company, Chandler, Arizona.