Hook-It® (MTB) is a fire-retardant, lightweight, abrasion resistant, PVC-coated Polyester fabric material that utilizes a cut-to-length hook and loop closure mechanism.
This particular Hook-It® product is the perfect cable or wire management solution because of its ability to be cut at any length without requiring additional sewing or heat sealing. Simply cut the product to your desired length with scissors and hold on to the rest until you need it again!
The hook and loop closure mechanism of Hook-It® (MTB) stays closed in high-flexing applications, yet is easy to re-open and re-close whenever necessary. The product is very easy to install, simply wrap your wire or cable bundle, then press the hook and loop closed for a secure covering.
Since no tooling is required for any Hook-It® product, they are ideal for general cable management applications such as those found in the home, office or even at industrial locations. Multiple wires or cables are no match for the Hook-It® product line, install them wherever they penetrate cabinets, equipment housings or internal wiring of appliances with ease. Because of its closure method Hook-It® also allows for easy cable breakouts and transitions within your wiring harnesses.
|Tensile Strength (Tongue)||17.75 lbs. (Warp) & 13.25 lbs. (Fill)|
|Tensile Strength (Grab)||99.25 lbs. (Warp & Fill)|
|Weathering||98% original strength|
|Arc Resistance||12 sec @ 12.5Kv|
|Shelf Life||36 months|
|Dielectric Constant||3.34 @ 50 Hz|
|Minimum Operating Temperature||3 ° F (-16 ° C )|
|Maximum Operating Temperature||140 ° F (60 ° C )|
|Flammability||Fire retardant coating|
Please contact us for custom needs. We have a solution for you!
|Shape of Installation||Round|
|Cable Diameter||0.5" 0.75" 1.0" 1.125" 1.5" 2.0" 2.75" 4.0"|
|Unit Length||164 ft. Roll 82 ft. roll|
|Exterior Material||Polyvinyl Chloride (PVC)|
Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitabilituriy for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2018 The Zippertubing® Company, Chandler, Arizona.
Sign up for our email list to stay up to date with all the latest and greatest at
The Zippertubing Company.