ISO 9001 / IATF 16949

7150 W. Erie St, Chandler, AZ 85226, USA

(855) 289-1874



HeatReflect® (ALS)

Drawing No. ZT15-03-003

 product image

Lightweight, Highly-Flexible, High-Temperature, Thermal-Protective, Aluminum-Coated Fiberglass Tape - Up To 300°F

HeatReflect® (ALS) is a thin, lightweight, flexible, fiberglass-reinforced, high-temperature tape that features a reflective aluminum surface on one side.

This heat-reflective tape is intended to be used in applications such as the Automotive and Transportation industries where high-temperature heat protection is needed to protect your valuable components. Install this tape on indoor or outdoor electrical wires, cables, hoses or pipes. HeatReflect® (ALS) can withstand continuous temperatures of up to 300°F.

The acrylic, high-temperature, clear adhesive backing provides a secure method of applying the tape to many types of installations and applications. Zippertubing’s similar product, HeatReflect® (ALP), which is also a thermal protective tape, has a thickness of .021”, while this product, HeatReflect® (ALS), is half the thickness at .011”.

The material used in HeatReflect® (ALS) tape has been tested to SAE J 2302 requirements.

Product Specifications

Thermal Effectiveness
SAE J2302
Shelf Life
24 months
Material Thickness
Minimum Operating Temperature
-40 ° F (-40 ° C )
Maximum Operating Temperature
300 ° F (149 ° C )
Fire Retardant

Available Attributes
Please call us at (855) 289-1874 for any custom needs. We have a solution for you!

Shape of Installation
Tape Width
1.0" Wide
Unit Length
25 ft. Roll
Units Per Box
2 Roll Pack

Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitabilituriy for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2019 The Zippertubing® Company, Chandler, Arizona.