05/26/18

Print

DATASHEET

ISO/TS 16949 ISO 9001

7150 W. Erie St, Chandler, AZ 85226, USA

(855) 289-1874

sales@zippertubing.com

www.zippertubing.com

 product image

HeatReflect® (ALP)

Medium-Weight, High-Temperature, Thermal-Protective, Aluminum-Coated Fiberglass Tape - Up To 300°F

HeatReflect® (ALP) is a medium-weight, fiberglass-reinforced, high-temperature tape that is coated with polyurethane and features an aluminum foil surface on one side.

This thermal-reflective tape is intended to be used in applications where high-temperature heat protection is required for either indoor or outdoor electrical wires, cables, hoses or pipes. HeatReflect® (ALP) can withstand continuous temperatures of up to 300°F.

The acrylic, high-temperature, clear adhesive backing provides a secure method of applying the tape to many types of installations and applications where thermal reflective protection is required.

The material used in HeatReflect® (ALP) tape has been tested to SAE J 2302 requirements.

Product Specifications

Shelf Life 12 months
Thermal Effectiveness SAE J2302
Flammability Self-extinguishing
Fluid Resistance Excellent
Material Thickness 0.021"
Minimum Operating Temperature -40 ° F (-40 ° C )
Maximum Operating Temperature 300 ° F (149 ° C )

Available Attributes
Please call us at (855) 289-1874 for any custom needs. We have a solution for you!

Shape of Installation ALL
Tape Width 1.0" Wide
Unit Length 25 ft. Roll
Units Per Box Single Unit 2 Roll Pack

Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitabilituriy for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2018 The Zippertubing® Company, Chandler, Arizona.