05/22/18

Print

DATASHEET

ISO/TS 16949 ISO 9001

7150 W. Erie St, Chandler, AZ 85226, USA

(855) 289-1874

sales@zippertubing.com

www.zippertubing.com

 product image

Snap-Grip® (SAM-1000)

A Flexible, Rugged, Lightweight, Aluminum-Silicon-Coated Fiberglass Cable-Management Solution with a Snap Closure

Snap-Grip® (SAM-1000) is a rugged, cut-to-length, self-extinguishing, heat-reflective aluminum-silicon-coated fiberglass cable-management solution. The self-extinguishing, heat-reflective, aluminum-silicon-coated fiberglass is perfect for the automotive industry.

This sleek product not only protects your valuable components from heat, but because Snap-Grip® (SAM-1000) is so rugged, it’s also perfect as an abrasion-protection cable management solution. The heavy-duty stainless steel snaps make Snap-Grip® (SAM-1000) easy, yet versatile, to install for just about anyone in any location.

The material used in Snap-Grip® (SAM-1000) has been tested to SAE J2302 requirements.

If you are in need of a solution that will protect your automobile’s wires or cables from whatever elements are hindering its operation, then chose The Zippertubing Company’s products to fix it.

Product Specifications

RoHS Compliant
Shelf Life 60 months

Available Attributes
Please call us at (855) 289-1874 for any custom needs. We have a solution for you!

Shape of Installation Round
Cable Diameter 0.75" 1.0" 1.125" 1.5" 2.0" 2.75"
Unit Length 82 ft. roll
Exterior Material SAM-1000
Closure Stainless Steel Snaps

Material Specifications

SAM-1000

Material Thickness 0.033"
Ratings SAE J2302
Temperature Range -50° to 240°C (-58° to 464°F)
Flame Retardant Self-Extinguishing
Tear Strength >650/>600 N/cm (warp) | >550/>400 N/cm (fill)
Configuration Aluminized Silicone-Coated Woven Fiberglass
Shelf-Life 60 months
RoHS Compliant
Abrasion Resistance Good
Material Thickness Variance -0.003" to +0.005"

Stainless Steel Snaps

RoHS Compliant
Shelf-Life 60 months

Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitabilituriy for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2018 The Zippertubing® Company, Chandler, Arizona.