Aluminized Fiberglass with Fiber Mat and Woven Silica Cloth Inner Jackets, Up to 650°C
Insuflect® is a composite heat-shielding product developed to be installed directly onto Diesel exhaust systems as part of the new “Clean Diesel Technology.” Insuflect® holds the heat within the system while Urea is injected to an exhaust reaction chamber resulting in an environmentally clean-burning Diesel engine.
Insuflect® can also be used to protect sensitive components that may be located in close proximity to high-temperature exhaust systems. This product is specifically designed for operational continuous temperatures up to 1,202°F (650°C) temperature range.
The material layers of Insuflect® are joined using Kevlar/Stainless Steel thread. This product is to be wrapped around a heat source and closes using Stainless Steel snap buttons.
Zippertubing is a leading manufacturer of thermal protection sleeves and jackets that provide a heat barrier designed to protect wiring, hoses, pipes or a variety of other components from radiant heat sources. We have the ability to produce custom shapes using a variety of heat-reflective materials.
|Composition||Aluminized Fiberglass / Silica Glass (3 Layer Composite)|
|Shelf Life||60 months|
|Minimum Operating Temperature||-40|
|Maximum Operating Temperature||1202|
|Shape of Installation||Round|
|Choose Your Cable Diameter||2" 2.5" 3.0" 3.5" 4.0" 4.5" 5.0"|
|Closure||Stainless Steel Reinforced Kevlar Thread Stainless Steel Snaps|
|Inner Jacket||Woven Silica Cloth|
|Temperature Range||650°C (1202°F) Continuous|
|Temperature Range||700°C (1292°F) Intermittent Spikes|
|Material Thickness Variance||+/- 0.0032"|
|Tensile Strength||20.5 lbs min.|
|Temperature Range||-240° to 898°C (-400° to 1650°F)|
|Configuration||Aluminized Silicone-Coated Woven Fiberglass|
|Material Thickness Variance||-0.003" to +0.005"|
|Tear Strength||>650/>600 N/cm (warp) | >550/>400 N/cm (fill)|
|Temperature Range||-50° to 240°C (-58° to 464°F)|
Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2018 The Zippertubing® Company, Chandler, Arizona.