ISO/TS 16949 ISO 9001


| 7150 W. Erie St. |

Chandler AZ 85226


P: (480) 285-3990

T: (855) 289-1874


Repair wires or cables with a diameter up to 1/2"

Zippertubing's Shrink-N-Repair® wrap-around heat shrink products offer a unique solution to repair damaged, cracked or chafed wires and cables. These products are perfect for electrical wire repairs where you are unable to disconnect or access the end of your application.

Unlike other forms of heat shrink that are tubes, Shrink-N-Repair® is a wrap, which wraps around your wires. You’ll never ever again need to slip, disconnect or re-wire prior to installation.

The only tools that you’ll need are scissors and a high temperature heat gun.  How is the product installed?  It’s as easy as open, cut, wrap, stick and heat.

This UL recognized indoor/outdoor wire repair heat shrink is not your standard heat shrink, the Shrink-N-Repair® wrap-around heat shrink products will provide an additional layer to your existing wire or cable and offers more abrasion protection where it’s needed. These products could be used in virtually any automotive, airplane, industrial, commercial or residential industry.

Shrink-N-Repair® is offered in a 3 foot rollor a 1 foot stick and can be cut to your desired length and width covering your damaged wires. Zippertubing offers two types of Shrink-N-Repair® products; Shrink-N-Repair® (Thin), and the version you see here, our standard Shrink-N-Repair®. The standard version of Shrink-N-Repair® is currently available in black, white and clear.

Purchase Shrink-N-Repair® in bulk through Zippertubing, or single units through Amazon!

Save time and get better protection on any job with Zippertubing’s Shrink-N-Repair® wrap-around heat shrink products.

Product Specifications

Dielectric Strength 500v/mil (after shrink)
RoHS Compliant
Elongation 200% (after shrink)
Shelf-Life 24 months
Flammability UL224, VW-1, Self-extinguishing
Fluid Resistance Excellent
Fungicide No Growth
Longitudinal Shrinkage +/-5% (after heat recovery)
Material Cross-linked Polyolefin
Material Thickness 0.035" - 0.055"
Shrink Temperature 90° to 121°C (194° to 250°F)
Tensile Strength 1500 psi. (after shrink)
Minimum Operating Temperature -40
Maximum Operating Temperature 199
Unit Length 1 ft. Stick 3 ft. Roll
Material Color Black Clear White
Units Per Box 12 Units (Full Case) Single Roll Single Unit

Material Specifications

Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2018 The Zippertubing® Company, Chandler, Arizona.