Shrink-N-Shield® (FE) Fluoroelastomer Shielded Tubing

A military-grade Viton® heat-shrink tubing paired with the Z-3250-CN shielding fabric to protect from EMI.

Drawing Number(s): ZT03-18-003

Shrink-N-Shield® (FE) Fluoroelastomer Shielded Tubing
RoHS

Select product options

Please fill in at least one field.
Please fill in the field.
Please fill in the field.
Please fill in the field.
Please fill in the field.
Please fill in the field.
Selected Part Number:ZT03-18-003-0.1875-B-X48.0
Get A Quote
WARNING: Cancer and Reproductive Harm | www.P65Warnings.ca.gov

Overview

Shrink-N-Shield® (FE) Fluoroelastomer Shielded Tubing
  • EMI shielding fabric provides better protection from electromagnetic interference
  • Viton® heat shrink meets MIL-DTL-23053/13 and MIL-R-46846, Type III, Class 1
  • Heat-shrink tubing provides the best resistance to abrasion and offers the best flexibility

Shrink-N-Shield® (FE) combines two proven technologies into a single, easy to install product for adding EMI shield protection to wire and cable bundles with diameters of 1.0" and less. Makes adding an EMI shield or secondary EMI shielding to wire and cable a snap. The product is comprised of SAE-AMS-DTL-23053/13 flexible Fluoroelastomer heat shrink tubing and Zippertubing's Z-3250 conductive cloth which has outstanding shielding properties. The outer tubing is a high temperature, rubber-like jacket which is highly fluid resistant and flame retardant. The operational temperature of this composite product is 175°C, but it can withstand short spikes to 200°C. This product is supplied in four foot long sticks.

Specifications

Overall Performance

  • Diameter - Before Shrink: 0.1875" (3/16)
  • Material: Viton
  • Heat Shrink Material: Viton
  • Maximum Operating Temperature: 302°F
  • Minimum Operating Temperature: -67°F
  • RoHS: RoHS-10
  • Shelf-Life: 60 months
  • Shield Bonding: Nitrile Adhesive
  • Shielding: Z-3250
  • Shielding Material: Nickel Plated Copper
  • Shrink Ratio: 2:1

Viton

  • REACH: Compliant
  • Copper Corrosion: Mil-DTL-23053
  • Dielectric Volts/Mil: 200 (after shrink)
  • Elongation: 250% (after shrink)
  • Flammability: Mil-DTL-23053, 15 sec (max)
  • Longitudinal Shrinkage: +1%, -20% maximum (after heat recovery)
  • Material: Cross-linked Fluoroelastomer (Viton®)
  • Maximum Operating Temperature: 392°F
  • Minimum Operating Temperature: -67°F
  • Water Absorption: 0.5 maximum
  • RoHS: RoHS-10
  • Shelf Life: 60 Months
  • Shrink Ratio: 2:1
  • Tensile Strength: 1200 psi (after shrink)

Z-3250

    Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © The Zippertubing® Company, Chandler, Arizona.

    Similar products

    Shrink-N-Shield® (2:1) EMI Shielded Heat Shrink Tubing PRT® (1553-135) Water-Blocking Wrap-Around Heat Shrink Shrink-N-Shield® (3:1) EMI Shielded Heat Shrink Tubing
    NAME SHRINK-N-SHIELD® (2:1) EMI SHIELDED HEAT SHRINK TUBING PRT® (1553-135) WATER-BLOCKING WRAP-AROUND HEAT SHRINK SHRINK-N-SHIELD® (3:1) EMI SHIELDED HEAT SHRINK TUBING
    DESCRIPTION Shrink-N-Shield® (2:1) is a MIL-SPEC, heat-shrink tubing with a 2:1 shrink ratio that provides exceptional shielding from EMI, RFI and EMF. A wrap-around, MIL-SPEC heat shrink paired with a high-temperature, water-blocking adhesive that comes equipped with the Z-3250-Tape™ for shielding against EMI. A heat-shrink tubing that provides exceptional shielding from EMI, RFI and EMF.
    Closure Tape (Specialty Surface)
    RoHS RoHS-10 RoHS-10 RoHS-10
    Abrasion Resistance Best Best Best
    Installation Type Pull-Through Wrap-Around Pull-Through
    Purpose EMI Shielding Water Blocking Small Diameters
    Min Temperature Extreme Extreme Extreme
    Minimum Operating Temperature -40°F -67°F -67°F
    Max Temperature Moderate Moderate Moderate
    Maximum Operating Temperature 275°F 275°F 275°F
    Flexibility
    View View View

    Guides

    Shrink-N-Shield® (FE) Fluoroelastomer Shielded Tubing

    A military-grade Viton® heat-shrink tubing paired with the Z-3250-CN shielding fabric to protect from EMI.

    Drawing Number(s): ZT03-18-003

    Selected Part Number: ZT03-18-003-0.1875-B-X48.0

  • EMI shielding fabric provides better protection from electromagnetic interference
  • Viton® heat shrink meets MIL-DTL-23053/13 and MIL-R-46846, Type III, Class 1
  • Heat-shrink tubing provides the best resistance to abrasion and offers the best flexibility
  • Features

  • High-temperature heat shrink can withstand moderately high temperatures
  • Shields from EMI, RFI, and EMF
  • Operational temperature range of -67°F to 302°F (-55°C to 150°C)
  • Benefits

  • Heat-shrink tubing protects from the toughest of conditions and environments
  • Z-3250 shielding fabric has a nickel coating for excellent corrosion resistance
  • Installation only requires a standard heat gun
  • Shrink-N-Shield® (FE) Fluoroelastomer Shielded Tubing

    Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © The Zippertubing® Company, Chandler, Arizona.

    SHIELDING EFFECTIVENESS - Z-3250

    ATTENUATION DATA WAS OBTAINED USING MIL-DTL-83528H (MODIFIED). TESTING WAS PERFORMED BY ACCREDITED, THIRD-PARTY EMI LABORATORIES.

    Shrink-N-Shield® (FE) Fluoroelastomer Shielded Tubing

    MATERIAL SPECIFICATIONS

    Product Recommendations

    Recently viewed