ISO/TS 16949 ISO 9001


| 7150 W. Erie St. |

Chandler AZ 85226


P: (480) 285-3990

T: (855) 289-1874

Shrink-N-Shield® (7200)

A Non-Magnetic, Halogen-Free, Hypoallergenic, Conductive EMI-Shielded Cloth, within a 2:1 Polyolefin Heat Shrink Tubing.

Shrink-N-Shield® (7200) combines two proven technologies into a single, easy-to-install product for adding EMI protection to smaller wire and cable bundles. This particular product is the perfect solution for those who require a certain criteria to install an EMI shielding. If you require a non-magnetic, halogen-free or hypoallergenic EMI shielding solution than you have found the right product for your specific needs.

Zippertubing's Z-7200 EMI-shielding fabric is a .005-inch thick, woven, copper-plated nylon, rip-stop material with a proprietary silver-colored, non-magnetic, corrosion-resistant top coating. The material is extremely useful in EMI hardening components of sensitive equipment that are easily upset by nearby magnetic materials and has shielding attenuation levels that average 60 dB from 10MHz to 18GHz.

By utilizing a polyolefin heat-shrink tubing the product is self-extinguishing, has excellent fluid resistance is RoHS compliant and offers Mil-Spec SAE-AMS-DTL-23053/5.

Product Specifications

Halogen-Free Yes
Shelf-Life 60 months
RoHS Compliant
Minimum Operating Temperature -40
Maximum Operating Temperature 275
Shape of Installation Round
Diameter Before Shrinkage 0.1875" 0.25" 0.375" 0.5" 0.75" 1.0" 1.5"
Unit Length 4 ft. Sticks
Exterior Material Polyolefin Heat Shrink
Shielding Z-7200-C
Material Color Black

Material Specifications


Dielectric Strength 500v/mil (after shrink)
Elongation 200% (after shrink)
Flammability Self-extinguishing
Fluid Resistance Excellent
Fungicide No Growth
Longitudinal Shrinkage +/-5% (after heat recovery)
Material Cross-linked Polyolefin
Material Thickness 0.035" - 0.055"
Mil-Spec SAE-AMS-DTL-23053/5
RoHS Compliant
Temperature Range -55° to 135°C (-67° to 275°F)
Abrasion Resistance Best
Shelf-Life 24 months
Shrink Temperature 90° to 121°C (194° to 250°F)
Tensile Strength 1500 psi. (after shrink)


Break Strength 25 x 50 lbs/in
Dielectric (volts/mil) Conductive <0.1 ohm/sq
Flexibility Good
Fluid Resist Mild Solvents
Material Type Copper-Plated Nylon Rip-Stop
Ratings Commercial
RoHS Compliant
Shelf-Life 60 months
Temperature Range -40° to 150°C (-40° to 302°F)
Material Thickness 0.005"
Shielding Effectiveness Better

Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2018 The Zippertubing® Company, Chandler, Arizona.