Drawing No. ZT15-18-001
A Non-Magnetic, Halogen-Free, Hypoallergenic, Conductive EMI-Shielded Cloth, within a 2:1 Polyolefin Heat Shrink Tubing.
Shrink-N-Shield® (7200) combines two proven technologies into a single, easy-to-install product for adding EMI protection to smaller wire and cable bundles. This particular product is the perfect solution for those who require a certain criteria to install an EMI shielding. If you require a non-magnetic, halogen-free or hypoallergenic EMI shielding solution than you have found the right product for your specific needs.
Zippertubing's Z-7200 EMI-shielding fabric is a .005-inch thick, woven, copper-plated nylon, rip-stop material with a proprietary silver-colored, non-magnetic, corrosion-resistant top coating. The material is extremely useful in EMI hardening components of sensitive equipment that are easily upset by nearby magnetic materials and has shielding attenuation levels that average 60 dB from 10MHz to 18GHz.
By utilizing a polyolefin heat-shrink tubing the product is self-extinguishing, has excellent fluid resistance is RoHS compliant and offers Mil-Spec SAE-AMS-DTL-23053/5.
|Shelf Life||60 months|
|Minimum Operating Temperature||-40 ° F (-40 ° C )|
|Maximum Operating Temperature||275 ° F (135 ° C )|
|Shape of Installation||Round|
|Diameter Before Shrinkage||0.1875" 0.25" 0.375" 0.5" 0.75" 1.0" 1.5"|
|Unit Length||4 ft. Sticks|
|Exterior Material||Polyolefin Heat Shrink|
|Shield Bonding||Nitrile Adhesive|
|Minimum Operating Temperature||-67|
|Elongation||200% (after shrink)|
|Longitudinal Shrinkage||+/-5% (after heat recovery)|
|Material Thickness||0.035" - 0.055"|
|Dielectric Strength||500v/mil (after shrink)|
|Maximum Operating Temperature||275|
|Shrink Temperature||90° to 121°C (194° to 250°F)|
|Tensile Strength||1500 psi. (after shrink)|
|Dielectric (volts/mil)||Conductive <0.1 ohm/sq|
|Fluid Resistance||Mild Solvents|
|Temperature Range||-40° to 150°C (-40° to 302°F)|
|Break Strength||25 x 50 lbs/in|
|Material Type||Copper-Plated Nylon Rip-Stop|
|Solvent||Acetone and Cyclohexanone|
|Flash Point||0 ºF (-18 ºC)|
|Viscosity||200 - 325 cps|
|Form||Light Tan liquid, (wet and dry)|
Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitabilituriy for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2018 The Zippertubing® Company, Chandler, Arizona.