ISO/TS 16949 ISO 9001
Building Quality Products & Solutions since 1957

The Zippertubing Company Website is currently under construction. This website will have limited functionality for the time being.

Shrink-N-Shield® (3:1)

Drawing No. ZT01-18-001

Part No. ZT01-18-001-0.375-B-X48.0

One-Step Shielding and Jacketing Tubing, 3:1 Shrink Ratio, Polyolefin

  • Easy One-Step Installation
  • 3:1 Shrink Ratio Tubing
  • Excellent High Frequency EMI Shielding
  • Ideal When Cable End Obstructions Exist
  • Lower Total Installed Cost

Product Specifications

Shape of Installation Round
Diameter Before Shrinkage 0.375" 0.5" 0.75" 1.0" 1.5" 2.0"
Unit Length 1 ft. Stick 4 ft. Sticks
Exterior Material Polyolefin Heat Shrink (3:1)
Shielding Z-3250-CN
Material Color Black

Material Specifications

Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using ZiPPERTUBiNG products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of ZiPPERTUBiNG shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of The ZiPPERTUBiNG Company. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2017 The ZiPPERTUBiNG Company, Chandler, Arizona.

One-Step Shielding and Jacketing Tubing, 3:1 Shrink Ratio, Polyolefin

Shrink-N-Shield (3:1) combines two proven technologies into a single, easy to install product for adding EMI shield protection to wire and cable bundles. It is ideal for cable diameters of 5/8" and less and the 3:1 shrink ratio allows for installation over pre-terminated components and hardware where standard 2:1 ratio tubing cannot be installed. This product makes adding an EMI shield or secondary EMI shielding to wire or cable a snap. The product has an operational temperature range of -45 to 135°C. This product is supplied in four foot long sticks and has a length tolerance of +/- ½ inch.

Speak to an Engineer Today!

We have highly experienced and friendly engineers on site ready to assist you in all your projects