Emi Shielding Heat Shrink - Heat Shrink - Products - ZT | Zippertubing Co.
ISO/TS 16949 ISO 9001
Zippertubing has been building quality products and solutions since 1957 Building Quality Products & Solutions Since 1957

Free Shipping for all online U.S. orders!

Filter

Heat Shrink

These products provide insulation, strain relief, and protection for a wide range of electrical wire or cables. Our heat shrink products are patented heat-shrinkable, wraparound solutions for on-site installation and repairs. You have the opportunity to add a wide variety of additional characteristics to a wire bundle, including water blocking, strain relief, EMI/RFI shielding, and chemical and thermal protection.

Heat Shrinkable EMI Shielding

For a one step jacketing and shielding material

Zippertubing® heat shrinkable shielding products will conform to the shape of wires, cables even components of various sizes and shapes with the ability to shrink down to a ratio providing effective EMI hardening of electrical interconnect areas and end terminals. Our heat shrinkable products are uniquely engineered with a dual wall system; the outer material is strong and flexible Polyolefin heatshrink tubing with an inner liner of finely knitted mesh or conductive foil each with frequency specific features that reduce radiated interference by reflection and/or absorption.

PRT® (S-3250) with Part Number: ZT98-04-017-0-B-X600.0

An EMI shielding wrap-around heat shrink solution
PRT® (1553-100) with Part Number: ZT11-KT-001-01

An EMI shielding, water-blocking, wrap-around heat shrink solution (Up to 212°F)
PRT® (1553-135) with Part Number: ZT04-KT-001-01

An EMI shielded, water-blocking, wrap-around heat shrink solution (Up to 276°F)

Shrink-N-Shield® (2:1) with Part Number: ZT99-18-006-0.1875-B-X48.0

One-Step Shielding and Jacketing Tubing, 2:1 Shrink Ratio, Polyolefin

Shrink-N-Shield® (3:1) with Part Number: ZT16-18-003-0.75-B-X12.0-1U

One-Step Shielding and Jacketing Tubing, 3:1 Shrink Ratio, Polyolefin

Shrink-N-Shield® (4:1) with Part Number: ZT16-18-002-0.75-B-X12.0-1U

One-Step Shielding and Jacketing Tubing, 4:1 Shrink Ratio, Polyolefin
Shrink-N-Shield® (TW) with Part Number: ZT02-18-003-0.1875-B-X48.0

One-Step Shielding and Jacketing Tubing, 2:1 Shrink Ratio, Polyolefin, Thin Wall Tubing
Shrink-N-Shield® (PVDF) with Part Number: ZT02-18-001-0.1875-C-X48.0

One-Step Shielding and Jacketing Tubing, 2:1 Shrink Ratio, Polyvinylidene Fluoride Tubing
Shrink-N-Shield® (HW) with Part Number: ZT04-18-002-01-B-X48.0

One-Step Shielding and Jacketing Tubing, 3:1 Shrink Ratio, Polyolefin, Heavy Wall Tubing

Shrink-N-Shield® (2X) with Part Number: ZT01-18-003-0.1875-B-X48.0

One-Step Shielding and Jacketing Tubing, 2:1 Shrink Ratio, Polyolefin, Double Shield Layer
Shrink-N-Shield® (FE) with Part Number: ZT03-18-003-0.1875-B-X48.0

One-Step Shielding and Jacketing Tubing, 2:1 Shrink Ratio, High Temperature Fluoroelastomer

PRT® (S-7200) with Part Number: ZT14-04-005-0-B-X600.0

A non-magnetic EMI shielding wrap-around heat shrink solution for sensitive components

Shrink-N-Shield® (7200) with Part Number: ZT15-18-001-0.1875-B-X48.0

A Non-Magnetic, Halogen-Free, Hypoallergenic, Conductive EMI-Shielded Cloth, within a 2:1 Polyolefin Heat Shrink Tubing.

PRT® (S-3250)

Part No. ZT98-04-017-0-B-X600.0

Drawing No. ZT98-04-017

PRT® (S-3250) is an EMI Shielded heat shrinkable wrap that provides a convenient wrap-around method of adding secondary insulation and EMI hardening to in-service electrical systems. The wrap around feature allows the material to be installed without the need to remove or disassemble ... View More

32 available combinations

An EMI shielding wrap-around heat shrink solution

Share

Favorite

PRT® (1553-100)

Part No. ZT11-KT-001-01

Drawing No. ZT11-KT-001

PRT® (1553-100) combines the proven benefits of heat shrinkable tubing (SAE-AMSDTL23053/5A), a hot melt adhesive environmental seal and EMI shielding with the installation ease of using Zippertubing's wrap around products. This product is designed to provide an environmentally sealed ... View More

3 available combinations

An EMI shielding, water-blocking, wrap-around heat shrink solution (Up to 212°F)

Share

Favorite

PRT® (1553-135)

Part No. ZT04-KT-001-01

Drawing No. ZT04-KT-001

PRT® (1553-135) combines the proven benefits of heat shrinkable tubing (SAE-AMSDTL23053/5A), a hot melt adhesive environmental seal and EMI shielding with the installation ease of using Zippertubing's wrap around products. This product is designed to provide an environmentally sealed ... View More

9 available combinations

An EMI shielded, water-blocking, wrap-around heat shrink solution (Up to 276°F)

Share

Favorite

Shrink-N-Shield® (2:1)

Part No. ZT99-18-006-0.1875-B-X48.0

Drawing No. ZT99-18-006

Shrink-N-Shield (2:1) combines two proven technologies into a single, easy-to-install product for adding EMI protection to smaller wire and cable bundles. Shrink-N-Shield is ideal for cables diameters of 1/2" and less. Shrink-N-Shield is comprised of SAE-AMS-DTL-23053/5 heat shrink tubing and Zipper... View More

7 available combinations

One-Step Shielding and Jacketing Tubing, 2:1 Shrink Ratio, Polyolefin

Share

Favorite

Shrink-N-Shield® (3:1)

Part No. ZT16-18-003-0.75-B-X12.0-1U

Drawing No. ZT16-18-003

Shrink-N-Shield (3:1) combines two proven technologies into a single, easy to install product for adding EMI shield protection to wire and cable bundles. It is ideal for cable diameters of 5/8" and less and the 3:1 shrink ratio allows for installation over pre-terminated components and hardware whe... View More

8 available combinations

One-Step Shielding and Jacketing Tubing, 3:1 Shrink Ratio, Polyolefin

Share

Favorite

Shrink-N-Shield® (4:1)

Part No. ZT16-18-002-0.75-B-X12.0-1U

Drawing No. ZT16-18-002

Shrink-N-Shield (4:1) combines two proven technologies in a single, easy to install product for adding EMI shield protection to wire and cable bundles with diameters of 1/2" and less. This product is comprised of our over expanded MIL-I-23053/5 heat shrink tubing and Zippertubing's Z-3250-CN conduct... View More

6 available combinations

One-Step Shielding and Jacketing Tubing, 4:1 Shrink Ratio, Polyolefin

Share

Favorite

Shrink-N-Shield® (TW)

Part No. ZT02-18-003-0.1875-B-X48.0

Drawing No. ZT02-18-003

Shrink-N-Shield (TW) combines two proven technologies into a single, easy to install product for adding EMI shield protection to wire and cable bundles with diameters of 5/8" and less. Makes adding an EMI shield or secondary EMI shielding to wire and cable a snap. This product is comprised of a thin... View More

7 available combinations

One-Step Shielding and Jacketing Tubing, 2:1 Shrink Ratio, Polyolefin, Thin Wall Tubing

Share

Favorite

Shrink-N-Shield® (PVDF)

Part No. ZT02-18-001-0.1875-C-X48.0

Drawing No. ZT02-18-001

Shrink-N-Shield (PVDF) combines two proven technologies into a single, easy to install product for adding EMI shield protection to wire and cable bundles with diameters of 1/2" and less. Makes adding an EMI shield or secondary EMI shielding to wire and cable a snap. The product is comprised of a fle... View More

6 available combinations

One-Step Shielding and Jacketing Tubing, 2:1 Shrink Ratio, Polyvinylidene Fluoride Tubing

Share

Favorite

Shrink-N-Shield® (HW)

Part No. ZT04-18-002-01-B-X48.0

Drawing No. ZT04-18-002

Shrink-N-Shield (HW) combines two proven technologies into a single, easy to install product for adding EMI shield protection to wire and cable bundles with diameters of 1/2" and less. Makes adding an EMI shield or secondary EMI shielding to wire and cable a snap. This product is comprised of SAE-AM... View More

10 available combinations

One-Step Shielding and Jacketing Tubing, 3:1 Shrink Ratio, Polyolefin, Heavy Wall Tubing

Share

Favorite

Shrink-N-Shield® (2X)

Part No. ZT01-18-003-0.1875-B-X48.0

Drawing No. ZT01-18-003

Shrink-N-Shield (2X) combines two proven technologies into a single, easy to install product for adding EMI shield protection to wire and cable bundles. It is ideal for cables with diameters of 3/4" and less. Makes adding an EMI shield or secondary EMI shielding to wire and cable a snap. This produc... View More

10 available combinations

One-Step Shielding and Jacketing Tubing, 2:1 Shrink Ratio, Polyolefin, Double Shield Layer

Share

Favorite

Shrink-N-Shield® (FE)

Part No. ZT03-18-003-0.1875-B-X48.0

Drawing No. ZT03-18-003

Shrink-N-Shield (FE) combines two proven technologies into a single, easy to install product for adding EMI shield protection to wire and cable bundles with diameters of 1.0" and less. Makes adding an EMI shield or secondary EMI shielding to wire and cable a snap. The product is comprised of SAE-AMS... View More

7 available combinations

One-Step Shielding and Jacketing Tubing, 2:1 Shrink Ratio, High Temperature Fluoroelastomer

Share

Favorite

PRT® (S-7200)

Part No. ZT14-04-005-0-B-X600.0

Drawing No. ZT14-04-005

PRT® (S-7200) is an EMI shielded heat shrinkable wrap-around tubing providing secondary insulation and EMI hardening to new or in-service electrical systems. This variant of Zippertubing's PRT® (S-7200) product features a special "non-magnetic" metal EMI shield cloth... View More

16 available combinations

A non-magnetic EMI shielding wrap-around heat shrink solution for sensitive components

Share

Favorite

Shrink-N-Shield® (7200)

Part No. ZT15-18-001-0.1875-B-X48.0

Drawing No. ZT15-18-001

Shrink-N-Shield® (7200) combines two proven technologies into a single, easy-to-install product for adding EMI protection to smaller wire and cable bundles. This particular product is the perfect solution for those who require a certain criteria to install an EMI shielding. If you require a ... View More

7 available combinations

A Non-Magnetic, Halogen-Free, Hypoallergenic, Conductive EMI-Shielded Cloth, within a 2:1 Polyolefin Heat Shrink Tubing.

Share

Favorite

Sign up for our email list to stay up to date with all the latest and greatest at The Zippertubing Company.