EMI Shielding Tape, SnCu Mesh/Copper Foil, Adhesive Backed
Zip-Mesh® (Cu) (also known as "strawberry tape") is a flexible, easy-to-use EMI Shielding tape of two-ply, woven Tinned-Copper mesh, separated by Copper polyester tape, with a self-adhesive material on one side. The material offers very low electrical resistance and is intended to complement Zippertubing's "SH1" Foil and "SHX" Series of knitted wire mesh EMI Shields.
The tape allows joining of EMI Shielded jacket sections at cable splices, branch-outs and the transition to connector hardware. The standard tape width is 1.0 inch with other sizes available on a custom basis.
This product has an operational temperature range of -40° to 175°C (-40° to 347°F).
|Flame Retardant||Not Flammable|
|Fluid Resistance||Good, Mild Solvents|
|Material Type||Sn/Cu Mesh Wrapped Copper Foil|
|Shelf Life||12 months|
|Sizes||1.0" & Up Tape Width|
|Minimum Operating Temperature||-40 ° F (-40 ° C )|
|Maximum Operating Temperature||347 ° F (175 ° C )|
|Shape of Installation||ALL|
|Tape Width||1.0" Wide|
|Unit Length||16.4 ft. Roll|
|Shielding||Copper Foil 36 AWG Wire Mesh|
|Units Per Box||2 Roll Pack 3 Roll Pack|
|Ratings||ASTM B33-94, MS3304 Type 1|
|Tensile Strength||.785 lbs|
|Electrical Resistance||936.51 ohms/lb @ 20C|
|Temperature Range||-55° to 204°C (-67° to 399.2°F)|
|Wire Size||36 AWG|
|Openings Per Inch||10-13|
|Configuration||Single knitted tube, flattened|
|Shelf-Life||12 months, unbonded (Zippertubing)|
|Release Liner||Polycoated Paper Liner|
|Adhesion||150 oz/in. (to steel)|
|Shear Strength||300 grams @ +149°C for > 10,000 minutes (Alum. to Steel)|
|Solvent Resistance||Very Good|
|Temperature||-40°C to 149°C Days/Weeks (-40°F to 300°F Days/Weeks) -40°C to 232°C Minutes/Hours (-40°F to 449°F Minutes/Hours)|
Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitabilituriy for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2018 The Zippertubing® Company, Chandler, Arizona.