Drawing No. ZT97-03-004
EMI Shielding Tape, SnCu Mesh/Aluminum Foil, Adhesive Backed
Zip-Mesh® (Al) is a flexible, easy-to-use EMI Shielding tape of two-ply, woven Tinned-Copper mesh, separated by Aluminum polyester tape, with a self-adhesive material on one side. The material offers very low electrical resistance and is intended to compliment Zippertubing's "SH1" Foil and "SHX" Series of knitted wire mesh EMI Shields.
The tape allows joining of EMI-Shielded jacket sections at cable splices, branch-outs, and the transition to connector hardware. The standard tape widths are 1.0 and 2.0 inches with other sizes available on a custom basis.
This product has an operational temperature range of -40° to 175°C (-40° to 347°F).
|Flame Retardant||Not Flammable|
|Fluid Resistance||Good, Mild Solvents|
|Material Type||Sn/Cu Mesh Wrapped Foil Tape|
|Shelf Life||12 months|
|Minimum Operating Temperature||-40 ° F (-40 ° C )|
|Maximum Operating Temperature||347 ° F (175 ° C )|
|Shape of Installation||ALL|
|Tape Width||1.0" Wide 2.0" Wide|
|Unit Length||16.4 ft. Roll|
|Shielding||Foil Shield 36 AWG Wire Mesh|
|Units Per Box||2 Roll Pack 3 Roll Pack|
|Temperature Range||-55° to 204°C (-67° to 399.2°F)|
|Wire Size||36 AWG|
|Electrical Resistance||936.51 ohms/lb @ 20C|
|Tensile Strength||.785 lbs|
|Ratings||ASTM B33-94, MS3304 Type 1|
|Openings Per Inch||10-13|
|Configuration||Single knitted tube, flattened|
|Electrical Resistance||15 ohms/mft @ 1.0"|
|Tensile Strength||13,500 psi|
|Elongation||90% at break|
|Temperature||-40°C to 149°C Days/Weeks (-40°F to 300°F Days/Weeks) -40°C to 232°C Minutes/Hours (-40°F to 449°F Minutes/Hours)|
|Shelf-Life||12 months, unbonded (Zippertubing)|
|Adhesion||150 oz/in. (to steel)|
|Shear Strength||300 grams @ +149°C for > 10,000 minutes (Alum. to Steel)|
|Solvent Resistance||Very Good|
|Release Liner||Polycoated Paper Liner|
Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitabilituriy for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2018 The Zippertubing® Company, Chandler, Arizona.