Z-Foil® is comprised of an Aluminum foil material with a laminated film of Mylar (Polyester) on one side and a pressure sensitive adhesive closure.
You’ll find Z-Foil® very useful in high-frequency EMI/RFI shielding applications where an economical, lightweight, low-profile shielding is wanted and re-entry is not needed. The SH1 Aluminum foil material is excellent as a general-purpose shielding product in areas such as an electronics rack. This product should not be used where a great deal of flexing may occur.
Z-Foil® is great for both round and flat cable shielding requirements and is available with or without a tin/copper ground wire. This product is flame retardant, and has an operational temperature range of -45° to 150°C (-49° to 302°F).
|Shelf Life||12 months|
Please contact us for custom needs. We have a solution for you!
|Shape of Installation||Flat Round|
|Cable Diameter||0.25" 0.375" 0.5" 0.625" 0.75" 0.875" 1.0" 1.25" 1.5" 1.75" 2.0" 2.25" 2.5" 2.75" 3.0" 3.25" 3.5" 3.75" 4.0"|
|Shielding||Foil Shield w/ No Ground Foil Shield w/ 15 AWG Ground|
|Tensile Strength||13,500 psi|
|Electrical Resistance||15 ohms/mft @ 1.0"|
|Elongation||90% at break|
|Shelf Life||60 months|
|Minimum Operating Temperature||3 ° F (-16 ° C )|
|Temperature||-40°C to 149°C Days/Weeks (-40°F to 300°F Days/Weeks) -40°C to 232°C Minutes/Hours (-40°F to 449°F Minutes/Hours)|
|Solvent Resistance||Very Good|
|Shelf Life||12 months, unbonded (Zippertubing)|
|Shear Strength||300 grams @ +149°C for > 10,000 minutes (Alum. to Steel)|
|Adhesion||150 oz/in. (to steel)|
|Release Liner||Polycoated Paper Liner|
Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitabilituriy for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2019 The Zippertubing® Company, Chandler, Arizona.