Z-3250-Tape™ is a conductive EMI Shielding Tape consisting of Zippertubing's Z-3250-CN EMI shielding fabric and an electrically conductive transfer adhesive backing. The adhesive eases installation and insures continuous continuity between individual coil winds. Use as a standalone shield in applications requiring a soft, thin, flexible and non-abrasive shield.
This product should be protected by a secondary insulation tape or jacket to protect the shield from damage. The tape allows joining of Z-Shield™, Shrink-N-Shield® and PRT™ (S) EMI Shielded jacket sections at cable splices, branch-outs, and transitions to connector hardware.
Z-3250-Tape™ provides excellent 98 percent electromagnetic shielding coverage when spirally wound with a 50% overlap (minimum). Z-3250-Tape™ standard tape width is 1.0 and 2.0 inch, while custom widths are available.
This product has an operational temperature range of -45° to 150°C (-49° to 302°F).
|Shelf Life||12 months|
Please contact us for custom needs. We have a solution for you!
|Shape of Installation||ALL Round|
|Tape Width||1.0" Wide 2.0" Wide Custom Size|
|Unit Length||25 ft. Roll 5 ft. Roll|
|Material Color||Bright Nickel|
|Minimum Operating Temperature||-40 ° F (-40 ° C )|
|Coating||Nickel Over Copper|
|Shelf Life||60 months|
|Base Fabric||Polyester Taffeta Fabric|
|Tensile Strength||74-79 lbs/in|
|Maximum Operating Temperature||250 ° F (121 ° C )|
|Surface Resistivity||<0.1 ohms/sq|
|Electrical: AC Impedence||.044 ohms (500 Hz - 100 KHz)|
|Electrical: Current Capacity||1 Amp/sq-in|
|Electrical Resistance||<.049 ohms (1.0 sq-in)|
|Particles||Silver coated Nickel|
|Release Liner||Polycoated Paper Liner|
|Temperature Range||70°C Days/Weeks 121°C Minutes/Hours|
|Shelf Life||12 months, unbonded (Zippertubing)|
|Adhesion (24hr.)||55 oz/in. (to steel)|
|Solvent Resistance||Poor (soften & swell and is removable with chlorinated & aromatic solvents and Ketones)|
Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitabilituriy for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2019 The Zippertubing® Company, Chandler, Arizona.