EMI Shielding Tape, Ni/Cu/Polyester Fabric, Adhesive Backed
Z-3250-Tape™ is a conductive EMI Shielding Tape consisting of Zippertubing's Z-3250-CN EMI shielding fabric and an electrically conductive transfer adhesive backing. The adhesive eases installation and insures continuous continuity between individual coil winds. Use as a standalone shield in applications requiring a soft, thin, flexible and non-abrasive shield.
This product should be protected by a secondary insulation tape or jacket to protect the shield from damage. The tape allows joining of Z-Shield™, Shrink-N-Shield® and PRT™ (S) EMI Shielded jacket sections at cable splices, branch-outs, and transitions to connector hardware.
Z-3250-Tape™ provides excellent 98 percent electromagnetic shielding coverage when spirally wound with a 50% overlap (minimum). Z-3250-Tape™ standard tape width is 1.0 and 2.0 inch, while custom widths are available.
This product has an operational temperature range of -45° to 150°C (-49° to 302°F).
|Shape of Installation||ALL|
|Tape Width||1.0" Wide 2.0" Wide Custom Size|
|Unit Length||25 ft. Roll|
|Material Color||Bright Nickel|
|Base Fabric||Polyester Taffeta Fabric|
|Coating||Nickel Over Copper|
|Temperature Range||-40° to 121°C (-40° to 249.8°F)|
|Surface Resistivity||<0.1 ohms/sq|
|Tensile Strength||74-79 lbs/in|
|Adhesion (24hr.)||55 oz/in. (to steel)|
|Electrical: AC Impedence||.044 ohms (500 Hz - 100 KHz)|
|Electrical: Current Capacity||1 Amp/sq-in|
|Electrical: Resistance||<.049 ohms (1.0 sq-in)|
|Particles||Silver coated Nickel|
|Release Liner||Polycoated Paper Liner|
|Shelf-Life||12 months, unbonded (Zippertubing)|
|Solvent Resistance||Poor (soften & swell and is removable with chlorinated & aromatic solvents and Ketones)|
|Temperature Range||70°C Days/Weeks 121°C Minutes/Hours|
Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2018 The Zippertubing® Company, Chandler, Arizona.