ISO 9001 / IATF 16949
Shielded Connector Covers consist of a .010" thick high-temperature PVC jacket (Mil-I-631D, Type F, Form S, Grade C, Class 1) laminated to an SH1 Aluminum foil EMI shield, with a 15 AWG drain wire and an R-Track thumb pressure closure.
The covers come in five standard trapezoidal shapes that are intended to enclose and EMI-harden a mated connector pair. When used in conjunction with Zippertubing's SH1 and 63-10 cable jacketing they can create a fully EMI-hardened cable assembly. The Connector Cover™ may also be cut to form tapered cone shapes that can carry the EMI shield over a connector mated to bulkhead or panel.
The SH1 EMI shield provides excellent shielding performance. The covers are flame-retardant, have good fluid resistance properties, and have an operating temperature range of -20° to 105°C (-4° to 221°F).
Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitabilituriy for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2018 The Zippertubing® Company, Chandler, Arizona.