Snap-Grip® (AL) is a commercial-grade PVC jacket laminated to an Aluminum foil EMI shield with a 15 AWG Tin/Copper drain wire and Nylon snap button closure. The material is intended for protected, indoor shielding applications where the snap-button spacing makes wire breakouts easy. This product provides good EMI shielding performance at an economical price, and the unique Snap-Grip® system is easy to apply and re-open when required.
Since no tooling is required to install or remove the jacket, it makes wire harness installation in cabinets, appliances or restricted access areas easy.
|Shelf Life||36 months|
Please contact us for custom needs. We have a solution for you!
|Shape of Installation||Round|
|Cable Diameter||0.375" 0.5" 0.75" 1.0" 1.125" 1.5" 2.0" 2.75" 4.0"|
|Unit Length||164 ft. Roll 50 ft. Roll|
|Exterior Material||Foil w/ Laminated PET|
Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitabilituriy for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2019 The Zippertubing® Company, Chandler, Arizona.