ISO 9001 / IATF 16949

7150 W. Erie St, Chandler, AZ 85226, USA

(855) 289-1874



Snap-Grip® (AL)

Drawing No. ZT98-08-002

 product image

PVC Jacket with SH1 EMI Shield, Snap Closure

Snap-Grip® (AL) is a commercial-grade PVC jacket laminated to an Aluminum foil EMI shield with a 15 AWG Tin/Copper drain wire and Nylon snap button closure. The material is intended for protected, indoor shielding applications where the snap-button spacing makes wire breakouts easy. This product provides good EMI shielding performance at an economical price, and the unique Snap-Grip® system is easy to apply and re-open when required.

Since no tooling is required to install or remove the jacket, it makes wire harness installation in cabinets, appliances or restricted access areas easy.

Product Specifications

Shelf Life
36 months

Available Attributes
Please call us at (855) 289-1874 for any custom needs. We have a solution for you!

Shape of Installation
Cable Diameter
0.375" 0.5" 0.75" 1.0" 1.125" 1.5" 2.0" 2.75" 4.0"
Unit Length
164 ft. Roll 50 ft. Roll
Exterior Material
Foil w/ Laminated PET
Nylon Snaps
Material Color
Shielding Effectiveness

Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitabilituriy for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2019 The Zippertubing® Company, Chandler, Arizona.