ISO 9001 / IATF 16949

7150 W. Erie St, Chandler, AZ 85226, USA

(855) 289-1874



 product image

Shrink-N-Shield® (7200)

Drawing No. ZT15-18-001

A Non-Magnetic, Halogen-Free, Hypoallergenic, Conductive EMI-Shielded Cloth, within a 2:1 Polyolefin Heat Shrink Tubing.

Shrink-N-Shield® (7200) combines two proven technologies into a single, easy-to-install product for adding EMI protection to smaller wire and cable bundles. This particular product is the perfect solution for those who require a certain criteria to install an EMI shielding. If you require a non-magnetic, halogen-free or hypoallergenic EMI shielding solution than you have found the right product for your specific needs.

Zippertubing's Z-7200 EMI-shielding fabric is a .005-inch thick, woven, copper-plated nylon, rip-stop material with a proprietary silver-colored, non-magnetic, corrosion-resistant top coating. The material is extremely useful in EMI hardening components of sensitive equipment that are easily upset by nearby magnetic materials and has shielding attenuation levels that average 60 dB from 10MHz to 18GHz.

By utilizing a polyolefin heat-shrink tubing the product is self-extinguishing, has excellent fluid resistance is RoHS compliant and offers Mil-Spec SAE-AMS-DTL-23053/5.

Product Specifications

RoHS Compliant
Shelf Life 60 months
Minimum Operating Temperature -40 ° F (-40 ° C )
Maximum Operating Temperature 275 ° F (135 ° C )

Available Attributes
Please call us at (855) 289-1874 for any custom needs. We have a solution for you!

Shape of Installation Round
Diameter Before Shrinkage 0.1875" 0.25" 0.375" 0.5" 0.75" 1.0" 1.5"
Unit Length 4 ft. Sticks
Exterior Material Polyolefin Heat Shrink
Shielding Z-7200-C
Material Color Black
Shield Bonding Nitrile Adhesive

Material Specifications


Abrasion Resistance Best
Flammability Self-extinguishing
RoHS Compliant
Fluid Resistance Excellent
Minimum Operating Temperature -67
Material Cross-linked Polyolefin
Elongation 200% (after shrink)
Longitudinal Shrinkage +/-5% (after heat recovery)
Material Thickness 0.035" - 0.055"
Dielectric Strength 500v/mil (after shrink)
Maximum Operating Temperature 275
Shelf-Life 24 months
Mil-Spec SAE-AMS-DTL-23053/5
Fungicide No Growth
Shrink Temperature 90° to 121°C (194° to 250°F)
Tensile Strength 1500 psi. (after shrink)


RoHS Compliant
Shielding Effectiveness Better
Dielectric (volts/mil) Conductive <0.1 ohm/sq
Ratings Commercial
Fluid Resistance Mild Solvents
Shelf-Life 60 months
Temperature Range -40° to 150°C (-40° to 302°F)
Break Strength 25 x 50 lbs/in
Material Thickness 0.005"
Flexibility Good
Material Type Copper-Plated Nylon Rip-Stop

Nitrile Adhesive

Base Synthetic Elastomer
Solvent Acetone and Cyclohexanone
Flash Point 0 ºF (-18 ºC)
Viscosity 200 - 325 cps
Form Light Tan liquid, (wet and dry)
Shielding Effectiveness

Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitabilituriy for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2018 The Zippertubing® Company, Chandler, Arizona.