Shrink N Shield 3_1 - Emi Jackets And Expandable Sleeves - Emi Shielding - Products - ZT | Zippertubing Co.
Zippertubing has been building quality products and solutions since 1957 image Building Quality Products & Solutions Since 1957

Shrink-N-Shield® (3:1)

Drawing No. ZT16-18-003

Part No. ZT16-18-003-0.75-B-X12.0-1U

One-Step Shielding and Jacketing Tubing, 3:1 Shrink Ratio, Polyolefin

  • This product provide an easy, one-step installation and provides a lower total installed cost
  • Shrink-N-Shield (3:1) EMI shielding material offers better shielding effectiveness of 65 db from 10MHz to 10GHz
  • Excellent anti abrasive, environmental, chemical, and electrical properties with resistance to most oils and fluids, mild acids, and alkalis

Shape of Installation

Round

Diameter Before Shrinkage

Unit Length

Exterior Material

Shielding

Material Color


Shrink-N-Shield (3:1) combines two proven technologies into a single, easy to install product for adding EMI shield protection to wire and cable bundles. It is ideal for cable diameters of 5/8" and less and the 3:1 shrink ratio allows for installation over pre-terminated components and hardware where standard 2:1 ratio tubing cannot be installed. This product makes adding an EMI shield or secondary EMI shielding to wire or cable a snap. The product has an operational temperature range of -45 to 135°C. This product is supplied in four foot long sticks and has a length tolerance of +/- ½ inch.

Related Products

Product Specifications

Maximum Operating Temperature 275 ° F (135 ° C )
Minimum Operating Temperature -49 ° F (-45 ° C )
Shelf Life 60 months
RoHS Compliant

Available Attributes

Please contact us for custom needs. We have a solution for you!

Shape of Installation Round
Diameter Before Shrinkage 0.375" 0.5" 0.75" 1.0" 1.5" 2.0"
Unit Length 1 ft. Stick 4 ft. Sticks
Exterior Material Polyolefin Heat Shrink (3:1)
Shielding Z-3250-CN
Material Color Black

Sizing Chart: ZT16-18-003

Size BEFORE
Inside Diameter (inches)
AFTER
Inside Diameter (inches)
AFTER
Wall Thickness (inches)
0.375 0.36 0.12 0.031
0.5 0.48 0.16 0.033
0.75 0.72 0.24 0.039
1 0.945 0.315 0.048
1.5 1.575 0.515 0.05
2.0 2 0.67 0.059
Shielding Effectiveness

Material Specifications

Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitabilituriy for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2018 The Zippertubing® Company, Chandler, Arizona.

Speak to an Engineer Today!

We have highly experienced and friendly engineers on site ready to assist you in all your projects