Hook-N-Shield® (SH1) has been added to your cart.
Hook-N-Shield® (SH1) has been added to your cart.
Hook-N-Shield® (SH1) has been added to your quote request.
Hook-N-Shield® (SH1) has been added to your quote request.
Hook-N-Shield® (SH1) is a wrap-around solution that shields from EMI, RFI, and EMF. The jacket of Hook-N-Shield® (SH1) is the 63-10, which is a thin and lightweight material. The 63-10 is 0.010” thick, military grade, RoHS compliant, and resistant to abrasion, copper corrosion, fluid, and fungus. This jacket is perfect for any application that needs protection in harsh environments.
The SH1 shielding laminate is a 0.0010” thick aluminum joined with a 0.010” thick PVC film that provides best EMI shielding. The shielding material is military grade with meeting Mil-I-631D, and UL-rated meeting UL224, VW-1.
The nylon hook-and-loop closure allows for quickest installation with no tools required. This closure system also allows for easy access to components as needed. Hook-N-Shield® (SH1) can be equipped with a 3/16” flat tin/copper drain wire for applications that need a full length, sewn-in ground wire.
Hook-N-Shield® (SH1) is the perfect EMI shielding solution for applications that will not experience flexing or movement. If there is a need for a solution that can withstand movement, Hook-N-Shield® (SHX) provides good EMI shielding while also allowing for flexing without compromising shielding performance. If you desire another EMI shielding material, custom Hook-N-Shield® solutions are available upon request.
Hook-N-Shield® (SH1) is offered for diameters ranging from 0.375” to 4”, with custom sizes available upon request. The operational temperature range of Hook-N-Shield® (SH1) is -4°F to 200°F (-20°C to 93°C).
| RoHS | Compliant |
|---|---|
| Minimum Operating Temperature | -20 ° F (-29 ° C ) |
| Maximum Operating Temperature | 199 ° F (93 ° C ) |
Please contact us for custom needs. We have a solution for you!
| Shape of Installation |
Round |
|---|---|
| Exterior Material |
63-10 |
| Shielding |
SH1 (Laminate) |
| Closure |
1" Hook and Loop (Nylon) 5/8" Hook and Loop (Nylon) |
| Cable Diameter |
0.375" 0.5" 0.625" 0.75" 0.875" 1.0" 1.125" 1.25" 1.375" 1.5" 1.625" 1.75" 1.875" 2.0" 2.125" 2.25" 2.375" 2.5" 2.625" 2.75" 2.875" 3.0" 3.125" 3.25" 3.375" 3.5" 3.625" 3.75" 3.875" 4.0" |
| Material Color |
Black |
| Composition | Polyvinyl Chloride |
|---|---|
| Copper Corrosion | Meets Mil-I-631D |
| Dielectric Strength | 600 volts/mil (0.010" thk.) |
| Configuration | Extruded Material |
| Dissipation Factor | 0.14 min. (1 kilocycle) |
| Fluid Resistance | Best |
| Flame Retardant | MIL-I-631 |
| Fungicide | Does Not Support Growth |
| Mil-Spec | MIL-I-631D, Type F, Form S, Class I |
| RoHS | Compliant |
| Dielectric Constant | 7.0 (1 kilocycle) |
| Shelf Life | 36 Months |
| Volume Resistivity | 1010 ohms/cm. mm. |
| Elongation | 200% min., 450% max |
| Material Thickness | 0.010" |
| Minimum Operating Temperature | -4 ° F (-20 ° C ) |
| Maximum Operating Temperature | 221 ° F (105 ° C ) |
| Tensile Strength | 1,800 psi. min. |
| Electrical: Resistance | 0.091 ohms/mft @ 1.0" |
|---|---|
| Fluid Resistance | Best |
| RoHS | Compliant |
| Shelf Life | 36 Months |
| Dielectric Constant | 7 |
| Elongation | 200% min., 450% max |
| Material Thickness | 0.010" |
| Minimum Operating Temperature | -4 ° F (-20 ° C ) |
| Maximum Operating Temperature | 221 ° F (105 ° C ) |
| Tensile Strength | 1,800 psi |
Attenuation data was derived using procedures defined in MIL-STD-285 and tested by scientific applications international corporation (SAIC) EMI laboratories, San Diego, California
| Ratings | GSA Spec A-A-55126, Type II, Class 1 |
|---|---|
| RoHS | Compliant |
| Material Thickness | 0.125" |
| Minimum Operating Temperature | -70 ° F (-57 ° C ) |
| Maximum Operating Temperature | 200 ° F (93 ° C ) |
| Material | Nylon |
(855) 289-1874
