Tin-plated copper wire EMI shielding mesh, 4-ply.
- Electrical resistance of 936.51 ohms
- Flexible and durable
SHX-4 (SnCu) is a flexible EMI shielding mesh made of tin-plated copper wire. The double layer of mesh enables the EMI shielding properties to be durable and long-lived, and provides a strong barrier between the components and the environment. The knitted mesh also maintains constant window spacing during movement of the cable assembly. Unlike most tubular braids, SHX-4 will not change attenuation performance when articulated. SHX-4 (SnCu) is offered in a 36 AWG, and can be applied to most Zippertubing® jacket materials to create an EMI shielding solution that is ideal for applications that require durability in flexing and good EMI shielding.
|Electrical Resistance||936.51 ohms/lb @ 20C|
|Shelf Life||60 months|
|Minimum Operating Temperature||-148 ° F (-100 ° C )|
|Maximum Operating Temperature||400 ° F (204 ° C )|
Attenuation data was derived using procedures defined in MIL-STD-285 and tested by scientific applications international corporation (SAIC) EMI laboratories, San Diego, California
Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2019 The Zippertubing® Company, Chandler, Arizona.