Nylon Snap Button Closure

Name: Nylon Snap Button Closure
Brand: zippertubing
Availability: InStock

Thumb Pressure Snap Buttons

Material Specification: 1117 RoHS

Overview

The Snap Button closure is a cost effective, re-enterable jacket closure system for cable management and high performance heat barrier applications. Snaps are available in both Nylon and Stainless Steel materials; they are approximately 3/8" in diameter and have hoop strengths of approximately 10 lbs/snap for Nylon and 15 lbs/snap for Stainless Steel. The Nylon snaps are White/Grey in color and are intended for light duty and low cost cable management applications. Installation of snap buttons only requires thumb pressure; no additional tools are needed. Utilizing the snap buttons could allow for the Zippertubing® product to be cut to length between the spaces of the snaps.

Specifications

Closure: Snap

Color: White

Material: Nylon

RoHS: RoHS-10

Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © The Zippertubing® Company, Chandler, Arizona.

Nylon Snap Button Closure

Thumb Pressure Snap Buttons

Material Sprcification: 1117

WARNING: Raw materials are not sold separately, please contact the sales department for any special requirements.

SPECIFICATIONS

Closure: Snap

Color: White

Material: Nylon

RoHS: RoHS-10

DESCRIPTION

The Snap Button closure is a cost effective, re-enterable jacket closure system for cable management and high performance heat barrier applications. Snaps are available in both Nylon and Stainless Steel materials; they are approximately 3/8" in diameter and have hoop strengths of approximately 10 lbs/snap for Nylon and 15 lbs/snap for Stainless Steel. The Nylon snaps are White/Grey in color and are intended for light duty and low cost cable management applications. Installation of snap buttons only requires thumb pressure; no additional tools are needed. Utilizing the snap buttons could allow for the Zippertubing® product to be cut to length between the spaces of the snaps.

Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © The Zippertubing® Company, Chandler, Arizona.