Z-Wrap® Datasheet - The Zippertubing Company

13000 S. Broadway
P.O. Box 61129
Los Angeles, CA 90061
(800) 321-8178
(310) 767-1714 FAX
www.zippertubing.com

Z-Wrap®
Lightweight Adhesive Closed PVC Coated Polyester Jacket, 10 Mil
Z-Wrap® is an economical, lightweight (.010”) wrap around jacket system for round, flat or rectangular cables utilizing Zippertubing’s type PVL-10 material and a pressure sensitive adhesive closure. A strip of high strength specially formulated Acrylic adhesive is bonded to one edge to provide a secure and flexible closure. The closure allows installation without the need for secondary tooling on assemblies that do not require re-entry and where a “pull-thru” jacket is undesirable. The thin adhesive closure allows for extremely tight cable bends since the seam area is very thin and highly flexible. The reinforced construction of Zippertubing’s PVL-10 material provides good wear resistance combined with high tear strength. Z-Wrap® is ideal for discrete wires, wire harnesses, hoses, and other applications where flexibility, strength and abrasion protection is needed. Custom sizes and colors are available. Refer to Zippertubing’s PVL-10 data sheet for specific material characteristics.
Features & Benefits: Adhesive Closure, No Tooling Excellent Abrasion & Chemical Properties Excellent Flexibility Flame Retardant, UL224, VW-1 Low Cost -40 To 82ºC Operating Limit

Build Part Number

Thickness (inch)	Material Type	Temp Range (°C)	Flame Retard	Break Strength	Ratings	Dielectric (volts/mil)
.010"	PVC Coated Polyester Fabric	-40 to 82	UL 224 VW-1	120 Warp; 100 Fill	Mil-C-43006, Type II, Class 1	N/A

EMI Shields Available	Flexibility	Fluid Resist	Cable Types	Sizes	Colors	Closures Available
All	High	Good (Wipe Down Only)	Round, Flat & Rect	3/8" & Up Round, 3/8" & Up Flat 3/8" & Up	Black & White (+ Many)	Adhesive

For more information contact Customer Support: info@zippertubing.com

Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters, which are beyond the control of the Zippertubing Company. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and Patents Pending. Copyright 2009 The Zippertubing Company, Los Angeles, California.