Z-Shield-AL Datasheet - The Zippertubing Company

13000 S. Broadway
P.O. Box 61129
Los Angeles, CA 90061
(800) 321-8178
(310) 767-1714 FAX
www.zippertubing.com

Z-Shield-AL
F.R. Polyurethane Jacket with SH1 EMI Shield
Z-Shield-AL is a wrap around EMI shielding jacket made of fire retardant Polyurethane film, SH1 EMI shielding foil and an adhesive closure. This combination provides excellent electromagnetic shielding of wires and cables in applications requiring limited flexing, flame retardance, good dielectric strength and no re-entry. Extremely useful in electronics applications where space may require a thin and flexible shielding. Z-Shield-AL can be configured to fit most Round, Flat or Rectangular cable configurations and is available with or without a drain wire installed. This is an ideal product for flat cable shielding applications. Z-Shield-AL will cross reference to Chomerics CJ-021 Jacket.
Features & Benefits: Excellent EMI Shielding (1 MHz to 20 GHz) Minimal Flex Applications Flame Retardant Polyurethane Jacket Adhesive Closure -55 to 107 C Operational Limit

Build Part Number

Z-Shield: Closing Procedure

Z-Shield: Termination Guide

Thickness (inch)	Material Type	Temp Range (°C)	Flame Retard	Break Strength	Ratings	Dielectric (volts/mil)
.012"	Polyurethane Film / SH1 Aluminum Foil Lamination	-55 to 107	UL 224, VW-1	N/A	Commercial	800 v/mil (Jacket)

EMI Shields Available	Flexibility	Fluid Resist	Cable Types	Sizes	Colors	Closures Available
SH1 Aluminum Foil	Medium	Good, Wipe Down Only!	Round, Flat & Rect	1/4" & Up Round, 3/4" & Up Flat 3/4" & Up	B	Adhesive

For more information contact Customer Support: info@zippertubing.com

Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters, which are beyond the control of the Zippertubing Company. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and Patents Pending. Copyright 2009 The Zippertubing Company, Los Angeles, California.