Z-Shield-5080 Datasheet - The Zippertubing Company

13000 S. Broadway
P.O. Box 61129
Los Angeles, CA 90061
(800) 321-8178
(310) 767-1714 FAX
www.zippertubing.com

Z-Shield-5080
F.R. Polyurethane Jacket with Z-5080-CN EMI Shield
Z-Shield-5080 is a wrap around EMI shielded jacket made of fire retardant Polyurethane film, flame retardant Z-5080-CN EMI shielding cloth and an adhesive closure. This combination provides good electromagnetic shielding of wires and cables in applications requiring outstanding flexibility, flammability to UL224, VW-1 and good dielectric strength. This product is extremely useful in electronics applications where space may require a thin and flexible shielding. Z-Shield-5080 can be configured to fit most Round, Flat or Rectangular cable configurations and is available with or without a drain wire installed. This product has an operational temperature range of -30 to 107ºC.
Features & Benefits: Fire Retardant (UL 224, VW-1) High Flexibility Applications Good EMI Shielding (10 MHz to 20 GHz) Adhesive Closure -30 to 107ºC Operating Limit

Build Part Number

Z-Shield: Closing Procedure

Z-Shield: Termination Guide

Thickness (inch)	Material Type	Temp Range (°C)	Flame Retard	Break Strength	Ratings	Dielectric (volts/mil)
.018"	Polyurethane Film/Z-5080-CN Lamination	-30 to 107	UL224, VW-1	N/A	Commercial	800 v/mil (Jacket)

EMI Shields Available	Flexibility	Fluid Resist	Cable Types	Sizes	Colors	Closures Available
Z-5080-CN	Very High	Good, Wipe Down Only!	Round, Flat & Rect	1/4" & Up Round, 3/4" & Up Flat 3/4" & Up	Black	Adhesive

For more information contact Customer Support: info@zippertubing.com

Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters, which are beyond the control of the Zippertubing Company. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and Patents Pending. Copyright 2009 The Zippertubing Company, Los Angeles, California.