TSH-3 Datasheet - The Zippertubing Company

13000 S. Broadway
P.O. Box 61129
Los Angeles, CA 90061
(800) 321-8178
(310) 767-1714 FAX
www.zippertubing.com

TSH-3
FEP Teflon Jacket with 3-Mil Aluminum Foil EMI Shield
TSH-3 is an outstanding EMI shielding product consisting of a FEP Teflon outer jacket bonded to a 3-mil Aluminum foil EMI shield. The product was designed to provide outstanding EMI shielding performance in rugged and demanding environmental applications where only FEP Teflon can survive. TSH-3 is currently in use on many aerospace programs as well as in commercial building Plenum rated areas. TSH-3 is a non-flammable product that meets UL224, VW-1 and has an operational temperature range of -70 to 200ºC. Standard TSH-3 comes with a FEP Teflon Z-Track closure and a 15 AWG Tin/Copper drain wire. The material is also available with several other closure types; however these may reduce the overall performance characteristics somewhat.
Features & Benefits: Excellent EMI Shielding (10 MHz to 20 GHz) Excellent heat & chemical resistance Minimal flexing applications Non-flammable, UL224, VW-1 Aerospace Qualified Operating temperature -70ºC to +200ºC

Build Part Number

ZTZ-SP Plier Tool Instructions

Termination & Splicing of Zippertubing Shields

“ZTZ-SP” Plier Tool

Thickness (inch)	Material Type	Temp Range (°C)	Flame Retard	Break Strength	Ratings	Dielectric (volts/mil)
.008"	3-mil Al Foil + 5-mil FEP Teflon Film Backing	-70 to 200	Non-Flammable	40 psi (burst, foil only)	QQ-A-1876, Type I, Grade B	Conductive, .070 ohms/ft per inch width

EMI Shields Available	Flexibility	Fluid Resist	Cable Types	Sizes	Colors	Closures Available
N/A	Low Flex Life	Excellent	Round, Flat & Rect	1/2" & Up Round, 1-1/4" & Up Flat 1-1/4 & Up	Aluminum / Clear	Z-Track (FEP), Zipper, H & L, Snaps

For more information contact Customer Support: info@zippertubing.com

Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters, which are beyond the control of the Zippertubing Company. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and Patents Pending. Copyright 2009 The Zippertubing Company, Los Angeles, California.