Shrink-N-Shield® (2X) Datasheet - The Zippertubing Company

13000 S. Broadway
P.O. Box 61129
Los Angeles, CA 90061
(800) 321-8178
(310) 767-1714 FAX
www.zippertubing.com

Shrink-N-Shield® (2X)
One-Step Shielding and Jacketing Tubing, 2:1 Shrink Ratio, Polyolefin, Double Shield Layer
Shrink-N-Shield (2X) combines two proven technologies into a single, easy to install product for adding EMI shield protection to wire and cable bundles. It is ideal for cables with diameters of 3/4" and less. Makes adding an EMI shield or secondary EMI shielding to wire and cable a snap. This product is comprised of a 2:1 shrink ratio MIL-I-23053/5 heat shrink tubing and Zippertubing’s Z-3250-CN conductive cloth which has outstanding shielding properties. The product uses a double layer of Z-3250-CN shielding cloth which produces an EMI shield with a shield coverage of 99% while still retaining it's very flexible character. The product has an operational temperature range of -55 to 135ºC. This product is supplied in four foot long sticks and has a length tolerance of +/- ½ inch.
Features & Benefits: Easy One-step Installation High Performance Mil-Spec Jacketing Outstanding High Frequency EMI Shielding Shield Coverage Near 99% Lower Total Installed Cost -55 to 135ºC Operating Limit

Order Part Number: ZT01-18-003-*

Thickness (inch)	Material Type	Temp Range (°C)	Flame Retard	Break Strength	Ratings	Dielectric (volts/mil)
.020" - .035"	Polyolefin Heat Shrink Tubing (Shielded), 2:1 Shrink Ratio	-55 to 135	UL224, All Tubing	1,500 (after shrinkage)	Made from Mil-I-23053/5, Type I & II, Class 1 Tubing	500 v/mil (after shrinkage) Jacket, <.1 Ohms/sq Conductive Shield

EMI Shields Available	Flexibility	Fluid Resist	Cable Types	Sizes	Colors	Closures Available
Double Layer Z-3250-CN	Medium	Excellent	Round	3/16, 1/4, 3/8, 1/2, 3/4, 1.0 & 1-1/2 (before shrinkage) N/A	Black (+ Many)	N/A

Nominal Size BEFORE and AFTER Shrinkage
Zippertubing Size	BEFORE	BEFORE	AFTER	AFTER
	Inside Diameter in.	Wall Thickness in.	Inside Diameter in.	Wall Thickness in.
3/16	0.187	0.01	0.093	0.020
1/4	0.250	0.01	0.125	0.025
3/8	0.375	0.01	0.188	0.025
1/2	0.500	0.01	0.250	0.025
3/4	0.750	0.01	0.375	0.030
1.0	1.000	0.01	0.500	0.035
1-1/2	1.500	0.01	0.750	0.035

For more information contact Customer Support: info@zippertubing.com

Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters, which are beyond the control of the Zippertubing Company. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and Patents Pending. Copyright 2009 The Zippertubing Company, Los Angeles, California.