The Zippertubing Co.
  13000 S. Broadway
  P.O. Box 61129
  Los Angeles, CA 90061
  (800) 321-8178
  (310) 767-1714 FAX
  www.zippertubing.com
 RoHS

Shielded ZT-Tape®

 EMI Shielding Tape, Polyurethane and Ni/Cu/Polyester Shield
Shielded ZT-Tape® is a combination of Zippertubing's fire retardant Polyurethane ZT-Tape® stagger bonded to a layer of Z-3250-CN shielding fabric with an electrically conductive adhesive backing. When spirally wrapped around electrical wires or other items using a 50% overlap technique, this product provides a finished installation with excellent electromagnetic shielding characteristics, shield coverage of 98 percent and a flame retardant insulation jacket with good dielectric strength. This tape eliminates the need to go back over a shielded assembly a second time to apply a protective dielectric insulator. Shielded ZT-Tape® is available in 3/4, 1-1/8, 1-1/2 and 2.0 inch widths to accommodate most wire harness diameters. This product has an operational temperature range of -45 to 107ºC.

Features & Benefits:
  • Flame Retardant Polyurethane Jacket
  • Excellent Shielding Characteristics
  • Flexible and Lightweight
  • Shield Coverage >98%
  • One Step installation
  • -45 to 107ºC Operating Limit
    •


    Thickness (inch)Material TypeTemp Range (°C)Flame RetardBreak StrengthRatingsDielectric (volts/mil)
    .018"Polyurethane Film & Ni/Cu/Polyester Fabric Lamination-45 to 107UL224, All Tubing (not tested)N/ACommercial800 v/mil (Jacket), <.1 Ohms/sq Shield

    EMI Shields AvailableFlexibilityFluid ResistCable TypesSizesColorsClosures Available
    Z-3250-CNHighVery Good, Wipe Down Only!All3/4", 1-1/8", 1-1/2" & 2.0" Tape Width 3/4", 1-1/8", 1-1/2" & 2.0" Tape WidthBlack / Bright NickelAdhesive Backing



    For more information contact Customer Support: info@zippertubing.com

    Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters, which are beyond the control of the Zippertubing Company. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and Patents Pending. Copyright 2009 The Zippertubing Company, Los Angeles, California.