The Zippertubing Co.
  13000 S. Broadway
  P.O. Box 61129
  Los Angeles, CA 90061
  (800) 321-8178
  (310) 767-1714 FAX
  www.zippertubing.com

SLM Slider

 Fast & Efficient Closing of all M-Track Products
The SLM tool is a Stainless Steel slider tool designed for closing Zippertubing M-Track products. It is required for all M-Track installations. The M-Track closure is similar to the smaller R-Track and S-Track closures but cannot be closed with finger pressure alone. The M-Track's physical size and high engagement force demands the use of a high strength engagement tool like the SLM. Track closure is achieved by inserting the upper and lower halves of the track interlock into the tool and then sliding the tool down the cable run. Sliding the SLM tool along the cable run forms the M-Track jacket around the cable harness and snaps it together to form a continuous tube. Use the SLM tool for all production line and field installations. Refer to the "How to Use" document for detailed instructions on the SLM slider tool.






For more information contact Customer Support: info@zippertubing.com

Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters, which are beyond the control of the Zippertubing Company. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and Patents Pending. Copyright 2009 The Zippertubing Company, Los Angeles, California.