SHX-4 (SnCuFe) Datasheet - The Zippertubing Company

13000 S. Broadway
P.O. Box 61129
Los Angeles, CA 90061
(800) 321-8178
(310) 767-1714 FAX
www.zippertubing.com

SHX-4 (SnCuFe)
Tinned Copper/Steel Wire EMI Shielding Mesh, 4-Ply
SHX-4 (SnCuFe) is a flexible 4 layer knitted wire mesh EMI shielding material that is made of Tin plated, Copper clad Steel wire. The knitted mesh design creates a highly flexible shield that unlike many tubular braids will not change attenuation performance when articulated. The knitted wire mesh maintains constant window spacing during cable assembly movement and as a result yields excellent EMI shielding performance from 500 KHz through 1 GHz. The material is highly conductive, rugged and is ideal for airborne applications where lightning strike grounding is required. The mesh can be added to most Zippertubing jacket materials to create an easy to install Zip-On EMI shielded assembly. SHX-4 shields come with a standard 15 AWG drain wire attached to simplify grounding.
Features & Benefits: Excellent EMI Shielding (500 KHz to 1 GHz) Extremely Flexible & Durable Withstands Lightening Strikes Non Flammable -55 to 204 C Operational Limit

Build Part Number

Termination & Splicing of Zippertubing Shields

Thickness (inch)	Material Type	Temp Range (°C)	Flame Retard	Break Strength	Ratings	Dielectric (volts/mil)
.030"	Knitted Tin Plated, Copper Clad, Steel Wire Mesh (4-Ply)	-55 to 204	Not Flammable	90,000 psi	ASTM B-452, Grade 40HS Wire	Conductive, 1.65 ohms/ft

EMI Shields Available	Flexibility	Fluid Resist	Cable Types	Sizes	Colors	Closures Available
N/A	High	Very Good	Round, Flat & Rect	1/2" & Up Round, 1-1/4" & Up Flat Depends On Jacket Closure	Bright Tin	Most, Varries with Jacket Selection

For more information contact Customer Support: info@zippertubing.com

Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters, which are beyond the control of the Zippertubing Company. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and Patents Pending. Copyright 2009 The Zippertubing Company, Los Angeles, California.