SH1 Datasheet - The Zippertubing Company

13000 S. Broadway
P.O. Box 61129
Los Angeles, CA 90061
(800) 321-8178
(310) 767-1714 FAX
www.zippertubing.com

SH1
2-mil Aluminum/Polyester EMI Shielding Foil
SH1 is a lightweight Mylar backed Aluminum foil shielding product that can be combined with most of Zippertubing's jacket products and closures to create an EMI Shielding jacket that provides outstanding EMI shield performance. Depending on the jacket material selected, SHI can meet general purpose shielding requirements or high performance Military requirements. It can withstand a minimum of environmental abuse and should not be used in applications requiring a great deal of flexing. It can be configured for Round, Flat and Rectangular cable shapes and is supplied with a 15 AWG Tin/Copper braid wire for grounding purposes.
Features & Benefits: Excellent EMI Shielding (1 MHz to 20 GHz) For limited flex applications Many shape configurations Flame retardant Low cost Operating temperature -55ºC to +150ºC

Build Part Number

Termination & Splicing of Zippertubing Shields

Thickness (inch)	Material Type	Temp Range (°C)	Flame Retard	Break Strength	Ratings	Dielectric (volts/mil)
.002"	1-mil Aluminum Foil / 1-mil Polyester Film Backing	-55 to 150	Not Flammable	11 psi (burst)	QQ-A-1876 Type I, Grade B	Conductive, .091 ohms/ft per inch width

EMI Shields Available	Flexibility	Fluid Resist	Cable Types	Sizes	Colors	Closures Available
N/A	Low Flex Life	Very Good	Round, Flat & Rect	3/8" & Up Round, 3/8" & Up Flat Depends On Jacket Closure	Aluminum or Aluminum / Blue	Most, Varries with Jacket Selection

For more information contact Customer Support: info@zippertubing.com

Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters, which are beyond the control of the Zippertubing Company. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and Patents Pending. Copyright 2009 The Zippertubing Company, Los Angeles, California.